Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Brian Cunfer Windsor class - any experiences?

Posts

Brian Cunfer Windsor class - any experiences?

#1

Brian Cunfer Windsor class - any experiences?

Scott in Douglassville

Hi all -

Recent life changes may be affording me the luxury of actual leisure time. I’m interested in getting more shop time in. I’m pondering a Windsor chair class (again). There are options, but Brian Cunfer in Lancaster is fairly close and has the benefit of including riving and turning in the coursework. I’ve done both but want the refresher and the opportunity to have my technique evaluated or critiqued.

I’ve only seen his name pop up here once, so I figured I’d ask if anyone has any firsthand experience with him and his teaching. Let er rip tater chip.

Thanks,

Scott in Douglassville

Re: Brian Cunfer Windsor class - any experiences?

#2

Re: Brian Cunfer Windsor class - any experiences?

Bill Tindall, E.Tn.

No knowledge of Brian, but a caution. Several people here in the SE teach these classes. I met one at the MWTC event ($800 class). Compared to Buchannan's chairs some of the others are crude and the finish looks lifeless. If the maker extolls the virtues of tool marks that stand out from a distance but sure you like this level of refinement before committing.

Re: Brian Cunfer Windsor class - any experiences?

#3

Re: Brian Cunfer Windsor class - any experiences?

Joe shelton

Late today I sweated through some riving that makes me think it would be more fun in a group.

But once I got down to a few small pieces, I was delighted with green wood on the shave horse. I'd not done that before.

Someday I'm taking a class on Windsors, too. Good luck with yours, and I'd be very interested in hearing about it.

Re: Brian Cunfer Windsor class - any experiences?

#4

Re: Brian Cunfer Windsor class - any experiences?

Scott in Douglassville

Thanks Bill. I ran into this years ago with a class I took with Jim Rendi. Love the sackback I made, not crazy about the refinement (good word). I’ve looked at Brian’s website and the chairs look nice. And he says he’s worked with Curtis, which I think is a decent sign.

Scott

Re: Brian Cunfer Windsor class - any experiences?

#5

Re: Brian Cunfer Windsor class - any experiences?

Scott in Douglassville

Thanks Joe. Neighbor brought down some trees and there are some ~4’ logs that appear straight. Imma offer to take them off his hands this weekend. My son will be home and can help me heft them. Would like to make some stools, good leg stock!

Re: Brian Cunfer Windsor class - any experiences?

#6

Re: Brian Cunfer Windsor class - any experiences?

Warren in Lancaster, PA

Jim Rendi died earlier this year, maybe in his late sixties. He was enthusiastic about historical methods, but his technique was very sloppy. Just not much of a craftsman, and he did not seem to care.

Many years ago I visited my friend Daniel O'Hagan here in Lancaster County on a Sunday afternoon. I waited twenty minutes while he finished up a letter. He explained that he was trying to get David Sawyer interested in making Windsor chairs. His letter was some instructions for Windsors and he wanted to make sure everything was just right. Later Curtis Buchanan studied with Sawyer.

Re: Brian Cunfer Windsor class - any experiences?

#7

Re: Jim Rendi

Scott in Douglassville

I’d heard about Jim passing. Actually was going to contact him and ran across the obit. Very sad to hear it.

Re: Brian Cunfer Windsor class - any experiences?

#8

Jack Guzman from Maine

Re: Jim Rendi

Jack Guzman from Maine

I used Jim Rendi's book on windsors as a guide while I was learning. Too much "eyeballing" angles. I was lost. When I discovered Curtis Buchanan I finally got it right. He is meticulous and precise with repeatable methods. I did learn alot though. It is a good book,just not a good building guide for first timers.

Sorry to hear he passed.

Re: Brian Cunfer Windsor class - any experiences?

#9

Re: Brian Cunfer Windsor class - any experiences?

William Duffield

Nuts! I'm sorry. I wasn't paying timely attention. I spent Saturday with Brian at the Hearne Hardwoods Open House, but didn't discuss his building and teaching techniques with him. I also didn't see a chair he has built, but we did have another SAPFM member's chair on display, not that that's of any use to you. I did notice that Brian has a very nice shavehorse, his froe and maul are very well used, and he makes elegant spindles. I didn't notice who you were looking for until I got home, so I'm not much help to your quest.

Re: Brian Cunfer Windsor class - any experiences?

#10

Re: Brian Cunfer Windsor class - any experiences?

Scott in Douglassville

Thank William, still good information to have.

Scott