Re: Double iron positioning?
David Weaver
In my haste reading this morning, I thought wiley has posted that. No intention to imply that after 40+ years, you would gain anything from looking at anyone else's rules!
Knowledge You Can Build On — Est. 1998
Re: Double iron positioning?
David Weaver
In my haste reading this morning, I thought wiley has posted that. No intention to imply that after 40+ years, you would gain anything from looking at anyone else's rules!
I got something out of it—thanks!!
Re: W-1
Hank Knight
I ordered an A2 replacement iron for my Norris A5 smoother form LN several years ago. A2 was out of stock so they sent me a W1 iron as an interim until the A2s came in. I flattened the back with little effort and sharpened it up. It worked flawlessly and holds a good edge for a long time. The A2 eventually arrived and LN didn't want the W1 returned, so I kept it. I'm still happily using it. I could never get the A2 to work in my plane. I think its too thick and chokes the mouth; but because the W1 has worked so well, I've never taken the time to have it surface ground to relieve the plane mouth.
Re: W-1
David Weaver
I wouldn't be surprised to hear that the w1 irons are variable and that some are real pearls to use. If they come out right and the stock used is good, they could potentially match she best vintage irons.
Above, where I mentioned buying 1095 for chisels and planes, what I was really looking for was w1, but some places had such a loose spec on w1 composition that I couldn't really tell what it get. One of the retailers for stock said their w1 carbon composition would be somewhere in the 0.6 to 1.3 percent range (!).
1095 is just a way to get a tighter spec range for the carbon. I vaguely recall George saying the same thing, but it didn't sink in until I went window browsing and looked for specs. We'd probably generally see 1095 as a modern saw and shim spring steel.