Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Kataba saw

Posts

Kataba saw

#1

Kataba saw

Joe Shelton

I'm marooned in Dallas (jerks stole the wheels and tires from my truck), so I had leisure to shorten the legs of chairs that were too high for the counter in my son's house. Strangely enough, I'd traveled without a handsaw.

Acting on this opportunity, I visited Woodcraft and got their last razorsaw, which I think is a kataba. Worked nicely, chairs fit well and cuts were impressively clean.

So now all I have to do is read and post on WC, and wait until the truck is re-shod.

Fie on thieves!

Re: Kataba saw

#2

Re: Kataba saw

Wiley Horne

Hi Joe,

What a terrible feeling that must have been. Something that could never possibly happen to oneself—but then it does. You are to be highly commended for having the gumption and resourcefulness to carry on with your visit.

If you’re not insured for that, let’s have a saw raffle (with the kataba) and you and Ellis split the proceeds.

Wiley

Re: Kataba saw

#3

But...but...I LIKE that little saw

Joe Shelton

Thanks, Wiley. It's insured. That allowed a modicum of composure.

Thanks for the affirmation.

Joe

Re: Kataba saw

#4

Traveling without a handsaw?

John in NM

What got into you? I can see forgetting the toothbrush, but you were just lucky there was a Woodcraft nearby! :D

Re: Kataba saw

#5

Re: Impact sockets.

TomD

Joe, bad luck. Good thing you had options to do good with wood.

My truck came with these dowdy looking rims, that had probably unnecessary locking nuts on each wheel. The dealer did not give us the key, and we drove for about 10000 miles before we realized that we did not have the necessary socket. Then we carried that around for a number of years until the socket went missing. That can be an expensive mistake, but if your shop rises to impact sockets, then you can just hammer a near size on and crack it loose. All that trouble and all you need to remove the Ford wheels at least is a socket.

Re: Kataba saw

#6

Re: Impact sockets.

Joe shelton

Tom, I asked the officer about the locking nuts, and he said they were a trivial problem for crews such as hit my truck (and a similar one in the same lot at the same time).

According to him, the number of patterns used on those "locking" nuts is very small, they are readily available, and the really bad guys have them all.

I now think that I was lucky, in that my truck was "jacked" by competent thieves. If they had felt compelled to break into the truck to get the tool in the glove compartment, they would have taken the Suretest circuit analyzer and other tools, including that new saw.

I'm back home now, and have a new mantra:

I'm not a big wheel

But I'm tireless

Striving for balance.