Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

The interesting world of Chinese Tools..

Posts

Re: The interesting world of Chinese Tools..

#26

Re: The interesting world of Chinese Tools..

Jim Matthews

By definition : information, especially of a biased or misleading nature, used to promote or publicize a particular political cause or point of view.

Fox Geezer syndrome has already ruined two Woodworking BBS.

Re: The interesting world of Chinese Tools..

#27

Re: I couldn't confirm it...

TomD

Not that you brought this up David... Someone's honesty relates in part to their starting point. I remember stating on this board that I had a plane that would take a shaving of 5 tens. I had it when I was still using my parents basement, so that would be in the early 80s. Basically got called a liar, though nicely. Now nobody bats an eye at that level of performance.

I couldn't find when Hotley started, but it is quite possible he started when standards were low. My 5 tens plane was my second Japanese plane that I made (I also had made a few Krenov planes back then), and it was really bad. You can press the blade in by hand, but those light cuts make it workable, and I have never fixed it. So any decent quality plane, that took a 5 tens shaving, and looked really nice, 20 years ago, would have been a marvel. A guy could believe he was a master on on the basis of standards few would miss today.

" I think it is unlikely anyone who follows me will achieve the same quality and precision, as there is no financial gain or reward with these objectives, I just survive." Quality is a meaningless term other than to suggest you aren't at the opposite end of the spectrum, and precision is also somewhat meaningless. That 5 tens plane of mine was enormously imprecise, but the sole conditioning (um... done on sandpaper) and the blade and mouth were good enough. So if he cuts the best dovetails, that really isn't significant in any performance measure. Something rather loosey goosey like an adjuster with zero backlash would be nice.

And even then, I would be far more interested in the guy who came up with a plane that took easy 1/8" shaving in maple, was warm to the touch, and didn't weigh all that much. Finishing is too easy.

-----------------

I think the case for Western thievery aside from passing masses of bad paper, is more that China has introduced it's fair share (according to them) of technologies and they don't feel they ever got the benefit of those gifts. Some other countries that may move into China's place as prime producers may not have the same claims.

Re: The interesting world of Chinese Tools..

#28

Re: Not sure when the rough work...

TomD

I think when people were actually working by hand, you couldn't sell them crap. That probably stopped for the most part in NA, about 50 years ago. I remember seeing a picture of a guy working on the modernist Toronto City hall (flying saucer between towers like a split toilet roll), and he was sawing with a handsaw. Must have been a union thing.

Re: The interesting world of Chinese Tools..

#29

Re: The interesting world of Chinese Tools..

TomD

"By definition : information, especially of a biased or misleading nature, used to promote or publicize a particular political cause or point of view."

As may be, but what is the evidence of that? Sounds mostly factual, he didn't even say what one should do. It seemed so largely self-evident as to not be worth saying, though the capitalism piece may be off. For some people that is a stand in word for a lot of other societal attributes, not merely putting capital to work which the Chinese obviously do.

"Fox Geezer syndrome has already ruined two Woodworking BBS."

That could also be, but the name calling probably had something to do with it.

Re: The interesting world of Chinese Tools..

#30

Re: I couldn't confirm it...

david weaver

Yes on all of that. Most of what we do with western planes isn't necessary to get the five tens you're talking about. Same with Japanese, though the super tight fitting may allow a much heavier cut without anything rattling around or coming loose.

I'm glad I didn't take this hobby up 40 years ago. IF it had been hard to find hand tool related stuff, I'd have just quit it entirely.

Re: The interesting world of Chinese Tools..

#31

Please...

John in NM

Who's bringing in the political disparagement now?

You made your point the first time, and I think you did it just fine.

Maybe the thing to do was leave it at that - by answering as you have, you are just falling into the opposite camp of geezer. No thinking person should be content believing the propaganda of either side.

Re: The interesting world of Chinese Tools..

#32

Re: Please...

Jim Matthews

You're absolutely correct. Distortions abound.

Have you ever heard an overtly political viewpoint inserted by voices OTHER than conservatives? My tolerance for such drivel has ended.

Re: The interesting world of Chinese Tools..

#33

Re: Please...

John in NM

"Have you ever heard an overtly political viewpoint inserted by voices OTHER than conservatives? My tolerance for such drivel has ended."

On this forum? Yes, certainly. Its been very quiet here from both sides for years though, I think we'd all like to keep it that way.