Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Heatless burrs for dremel?

Posts

Re: Heatless burrs for dremel?

#26

Re: Did what Warren said

Hank Knight

That looks really nice, Wiley. Warren's The Man!

Re: Heatless burrs for dremel?

#27

Re: Did what Warren said

Warren in Lancaster, PA

Wiley, I sent you an email picture of the moulding because I could not post it. There is boxing for a quirk, so that point on the iron is to be sunk into the surface, and beyond the quirk is a stop to limit the depth of the moulding. The stop comes to rest on the face of the board. The cove portion should be at the very edge of the board.

The board should be fastened flat on the bench to make this moulding.

Re: Heatless burrs for dremel?

#28

Warren is the man, and he was kind *LINK*

Wiley Horne

enough to send me a photo offline of what this profile should look like when executed correctly. Here is Warren’s example:

https://www.flickr.com/photos/78661951@N07/47852630742/in/album-72157678293590307/

Can you spot the difference :) :\ :O :b :) ?

Wiley


Example by Warren Mickley

Re: Heatless burrs for dremel?

#29

Grinding wheels etc.

Steve Voigt

Wiley, I'm late to the party, but for future reference...do you own a bench grinder? If so, a narrow (1/8 or 3/16) wheel is preferable, by far, to using a little cone on a dremel or drill motor. A cheap diamond dressing bar can be used to shape the wheel to whatever radius you need.

Norton makes pricey narrow wheels, but a much cheaper option is a chainsaw grinding wheel.I buy the Timber Tuff (LOL) wheels at tractor supply for about $14. You'll need an adapter; I use the backing flange from a 4-1/2" angle grinder (about $4 if you don't have one) to go from the 7/8 wheel to my 5/8 grinder shaft.

Regarding making the molding profile, if you haven't checked out Matt Bickford's book, I recommend it. The majority of it is about how to rough out moldings like yours with rabbets and chamfers.

Re: Heatless burrs for dremel?

#30

Re: One of them is backwards.

Re: Heatless burrs for dremel?

#31

Correct!  Warren’s is right side up!

Re: Heatless burrs for dremel?

#32

All I see are Panda bears on both links (?) ...


Re: Heatless burrs for dremel?

#33

Re: All I see are Panda bears on both links (?) ..

Wiley Horne

John,

Please understand, we’re dealing with Yahoo here. Snafu meets fubar. That’s who took over Flickr. I’ll see if my technique of rapid-fire pushing buttons and monkeying around and pushing whatever button I haven’t already pushed—will work. See, my approach is to exhaust the software’s degrees of freedom—you do this by trying all permutations and combinations of button pushing. Once in a while it works, and once in a while you have to reload the operating system.

Wiley

Re: Heatless burrs for dremel?

#34

Flickr back up now—holding breath