Having never before used redwood, I started a small project with it last weekend. It planes beautifully, is easy to chisel without crushing and looks nice enough. But I've come think of it as a bundle (a loose bundle) of splinters. I can't touch the stuff without feeling as if I've picked up a porcupine. Apparently some of the splinters are too small for me to see, but I sure feel them.
I have to go out there now and complete this, and I'm going to try using gloves.
My understanding is that redwood heartwood is rot resistant but not the sapwood. And the end of every pre-primed redwood board I've seen shows some sapwood.
Good observation! Maybe others will pitch in, but I recall, the basic redwood grading is between heart and common, where the common will contain sap. Then a bunch of other grades within this basic breakdown, to do with knots primarily. Then there’s high-grading the pile, to find boards that will do😀.
Great project, Joe! Herbs are fun, whether they trail or make it to the table.
I didn’t mean to give the impression I was ‘defending’ redwood. I was kinda surprised, as redwood tends to be among the softest and smoothest of woods, although it can sorta ‘petrify’ and get gnarly after decades of doing stud duty.
Hope things are OK in your part of Alabama. Seriously.
Talked to a local distributor regarding availability of construction heart redwood, something I readily brought a few years ago. He told me that it was now only available in limited quantities at high cost. Explained that the all heart lumber came from old growth trees. Most of what is available today is lumber from small diameter plantation grown trees. Eco friendly but contains sapwood.
And yes, heartwood is more resistant to decay and termite attack than sapwood. Not immune, but more resistant.
Presumably, the only old growth stuff is coming off of private land, and probably only when it's profitable to do so.
My porch (which I had built into a permanent room) was all redwood from the early 70s with zero damage. It wasn't an aesthetically pleasing porch on top of the redwood (siding, etc....70s style with wagon wheel lights hanging from the ceiling), but it was still a bummer to ditch all of the wood.
there's a nice video online of a tree service removing an urban tree and then milling the lumber (which is not that impressive due to the fast growth - the look of the lumber). The tree that's milled was only 60 years old and shockingly huge (6 feet wide at the base, who knows how tall...150 feet?). The tree removal guy said that it was unstable at only 60 years old and undermining a house (planted too close), but all of the lumber that was milled from the tree was used by a guy making farm tables.