Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Oul for the outside of a hand plane?

Posts

Oul for the outside of a hand plane?

#1

Oul for the outside of a hand plane?

AZ in Colorado Springs

I just cleaned up an old Stanley #4 that I got several years ago. Took it apart and cleaned especially all the threads and put some white grease on them.

I rubbed beeswax on the sole. The sole is ribbed, rather than smooth (don't remember the term for that).

What kind of oil do you use to wipe down the exterior surfaces?

Re: Oul for the outside of a hand plane?

#2

Re: Oul for the outside of a hand plane?

Hank Knight

Don't use oil. Put a little paste wax on the exterior (and the interior) surfaces and buff it. It keeps the rust from undoing all your hard work.

Re: Oul for the outside of a hand plane?

#3

Re: Oul for the outside of a hand plane?

roger lance

AZ.....the term is "corregated"......I use wax or an oil sold by LN.....camiella or jojoba oil.

Re: Oul for the outside of a hand plane?

#4

Re: Oul for the outside of a hand plane?

Gary B

I use a rag in a can oiled, like Paul Sellers uses, with 3 in 1 oil. Super fast and it works well

Re: Oul for the outside of a hand plane?

#5

Re: Oul for the outside of a hand plane?

AZ in Colorado Springs

Thanks. And someday I'll learn to spell "oil" correctly.

Re: Oul for the outside of a hand plane?

#6

Re: Oul for the outside of a hand plane?

Clementine

Where I live "oil" has three syllables and is pronounced "all."

Re: Oul for the outside of a hand plane?

#7

camellia oil

GolfSteve in Calgary

I use camellia oil on my handplanes, scrapers, table-saw top, and lathe bed. It does a good job of reducing surface corrosion. Camellia oil is light, it doesn't smell bad, and it hasn't interfered with any finishes I've applied.

I also live in a region with cool dry climate so rust is not a bit problem.

Re: Oul for the outside of a hand plane?

#8

Re: camellia oil

AZ in Colorado Springs

Rust is not a major worry in Colorado, either. I use paste wax on my machines to allow the stock to glide easily without a strong push. Didn't think of it for handplanes. That's an easy solution though, since I have two cans of Johnson's. I'd read of wiping with an oily rag.