Thoughts on the LV Shooting Board System
TomD
Looks like an interesting idea, though in my case I am pretty much a 90 degree guy. I found it in the fall 2018 catalog.
Knowledge You Can Build On — Est. 1998
Thoughts on the LV Shooting Board System
TomD
Looks like an interesting idea, though in my case I am pretty much a 90 degree guy. I found it in the fall 2018 catalog.
Re: Thoughts on the LV Shooting Board System
roger lance
A great company like LV has to innovate......come up with new, improved products to keep the cash registers ringing. I also know that there was a metal shooting board made by Stanley which went along with their shooting plane and that there is real interest in these old boards as they could be adjusted to produce various angles for shooting.
But, I've gotten use to the idea that a shooting board can be made easily by a ww and be made in a simple configuration that will allow for successful adjustment of 90* and 45* miters.
Thus, I find this new LV product interesting but don't know that I need it.
Re: Thoughts on the LV Shooting Board System
TomD
I guess that if they have sold a lot of their excellent shooting planes it would make sense to provide these additional items. I really like their shooting plane. But, I've gotten used to the idea that a plane can be made easily, so I haven't been able to justify the cost at this point, though that is just a money issue which would not deter everyone.
I personally prefer un-tracked shooting boards, they seem to be more versatile, but given the parts can be staged on plywood, a person could work it out in several formats and choose for themselves.
Re: Had a look...
TomD
Saw one today, at the store. I really liked it. It's too expensive for me and my needs. That pay anything period in my acquisitions is in the rear view mirror for me. But plenty of people would not find the price high at all and the quality and value is there. Of course many people may have a plane to use already, so the cost comes down to a few router bits.
My favourite feature is the adjustable sacrificial fence. I twiddled the angle to something like 45 degrees, locked it in, and immediately adjusted the fence to zero exposure to the sole of the plane. Not just the edge, you can get support out to the sole. Not that one mostly needs that, but it would also provide support right to the blade edge, and that can vary given the angle adjust, or any variance in depth of cut, which may vary by wood. Again, these are small points, but it was effortless. You can also adjust the back cut of the fence, so you get only the support you need, and don't have to plow through a lot of material you don't need in the cut.
I don't really need any of that stuff, and I am not sure who needs all the angles. Possibly someone doing latices and display cabinets, though there are so many simple ways of doing those kinds of cuts with little jigs... It is a nice tool with a nice feel, and at a lot less money than an even more limited Festool, I hope it appeals to many.
The only issue I had with it, is that the angle adjust takes up a lot of space. My shooting board is about the same size, and I can also shoot guitar boards on it that are over 20 inches long. This unit is a lot more size restricted, so I would be careful about buying the completed kit unless you check whether it works with your stock. Of course, not working at 90 degrees means longer cuts, so it isn't just a mater of how wide your stock is. It comes down to the angled cut; the space consumed by the miter fence; the length of the plane. Worst case you might end up with a longer board, maybe too long to edge mount on your bench, if it isn't terribly wide. Easy work-arounds.