Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Where to find "real" varnish

Posts

Re: Where to find "real" varnish

#26

Re: Where to find "real" varnish

Don Stephan

Here in Cincinnati, Ohio I buy P&L 38 gloss in quarts. You might call the company in Cleveland and ask about availability of quarts and gallons in your area.

I have been using a Stop Loss bag for several months now and P&L 38 seems to keep without gelling as I use it, rather than gelling in a partially full can in a couple months even with argon spray used.

Re: Where to find "real" varnish

#27

Re: Where to find "real" varnish

david weaver

Thanks for the tip on the bags, Don.

I'll check with P&L. I live in a city (i guess most people do these days), so there might be enough pro-catering shops (plain places that don't stock much but still can get everything) around here that I could get a quart.

Re: Where to find "real" varnish

#28

Had to chuckle...

John in NM

About living in a city - most weekends I try to get out of the town (population 693) where I live because it roughly doubles in size due to tourists escaping the heat down in the flat lands. I drive up to my other house in a town with a population of 172!

Re: Where to find "real" varnish

#29

Re: Had to chuckle...

david weaver

I sort of know how you're feeling. I live in an area in the burbs here that has good flow out (if you're in the older neighborhoods, you can get locked in by traffic, or road closures if there are events like a marathon).

I also grew up in Gettysburg. I don't know what the tourist population is at any given time, but the tourists gave me good reason as a kid to stay outside of town. In 20 years since I've lived there, it's become almost unrecognizable with sprawl from town, and a trip into town used to take 5 minutes for four miles. No lights to speak of. There are probably 6 or more stoplights for the same trip, and the antiquated road in and out (US route 30) can take several minutes just to get out of the driveway - four miles out of town.

As far as where I am now in the burbs, there are still some gems of stores owned by families (like the ace). They often have a specialty and the regular stuff is tiny compared to a large store (like the paint and solvents section in mine that is on the P&L dealer list - it's both sides of a shelf about 8 feet long for all of it. The whole store is about as big as HD's paint section, but their specialty there is commercial lawn equipment (tiny in area, but staffed with a couple of pros and a lot of foot traffic in their tiny shop). It's nice to have those places. Growing up in Gettysburg, there were a lot of the typical stores that had stuff for twice the price of walmart, and the owners kept 90% of the proceeds and paid the help minimum wage with no benefits. When walmart came in, they were easy pickings. Restaurants were generally terrible, because the supply of tourists meant unless you couldn't pass health inspection, you always had patrons who didn't know of your reputation - and the disposition of most of the help matched the quality of the food.

In that respect, I do like the city better, but this city has a small town kind of feel in a lot of places, despite a metro area with about 2 1/2 million people. Being stuffed in the middle of appalachia also means you can't see much at once, so there isn't a perception of lots of sprawl around you - just the little valley you're in at any given time.

Re: Where to find "real" varnish

#30

Re: Where to find "real" varnish

Barney Markunas

Late to the party, I know but you might reach out to the folks at the Olde Mill Cabinet Shoppe in York. They used to have all sorts of things like various natural dyes and resins for folks doing period work that wanted to brew their own finishes. If you go that route, work outside, wear appropriate PPE and have a fire extinguisher handy.

The wooden boat guys should be able to give you the lowdown on Epifanes. I think it generally has a good rep but I suspect since it is designed for outside use it may be softer and more flexible than you really want.

Re: Where to find "real" varnish

#31

Re: Where to find "real" varnish

david weaver

Thanks, Barney - next time I'm home ...well, "home" where I grew up, I'll call them. York is 20 miles from my parents.

Yes on the cooking. Everything I've read says don't do it with anything you like, because you can have a boilover with 550 degree oils and resins that will dry rock hard on whatever they don't burn up.

I plan to get a standalone burner and use it in the middle of the back yard when the mrs. isn't home.

Getting turpentine that actually smells like pine has been difficult (for reasonable - so reasonable is out the window - it's about $35 a pint, and apparently even the art store stuff smells like oil and not turps).

If i can get a good batch with the "right" ingredients, I may try the cheap stuff to see how it turns out (sunnyside turps and cheap non-boiled oils, and pitchers rosin for the resin). The process looks like three hours of moderately dangerous temperatures, though (300C for the bonding of the oils and resins, etc).

Re: Where to find "real" varnish

#32

Re: Where to find "real" varnish (stop loss bags)

david weaver

Thanks again, Don, for the Stop Loss bag suggestion. The bags are a liter, I think, and I had about 20 ounces of thinned varnish, which appears to probably be enough for 6 or 8 guitars (but it never would've lasted in a jar).

I am padding it on, and squeezing a little bit out of the bag onto the guitar is ideal - it doesn't penetrate, so it doesn't matter if a glob is squeezed out and then spread. None of the rest of the finish is exposed to oxygen and i'm not sticking my hand in the jar.

Re: Where to find "real" varnish

#33

Re: Where to find "real" varnish (stop loss bags)

Don Stephan

Glad it is working for you. I learned of Stop Loss bags because another turner was kind enough to describe them at a monthly Cincinnati wood turning meeting, so I'm just paying forward.