Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Froe

Posts

Froe

#1

Froe

Joe shelton

I've ordered a Froe from LN, intending to reduce some cherry to sticks I can turn for handles. The stock I have now is all 8" diameter or less, and 3' long or shorter. Coming from a single limb, it includes heavy amounts of compression wood.

Using this froe, can I expect to halve sections, or should I nibble off small portions?

Re: Froe

#2

Re: Froe

Don Stephan

My understanding is that one always wants to split the blank into equal halves if possible, so the split doesn't run to the thinner side. In other words, split the branch into halves, each half into quarters, each quarter into eighths, and so on.

Re: Froe

#3

Jack Guzman from Maine

Re: Froe *LINK*

Jack Guzman from Maine

Always try to split in half. Curtis Buchanan talks a little about riving with a froe in the video in the attached link(I hope).---Jack


https://www.youtube.com/watch?v=bTQ2PWVw6ZE

Re: Froe

#4

Re: Froe

Joe shelton

Thanks, Don and Jack. The video helped, too.

Re: Froe

#5

Re: Froe

Bruce, a MN Galoot

Besides, if splitting compression wood and you don’t halve it, there will be unresolved tension problems.