Re: Mini-splits
david weaver
If you have four or five hours of time, a distance of less than 25 feet and only one head, you should do the installation yourself if you can follow directions.
The literature that comes with the split systems is clear, and I found that I would've followed it more closely than the installers did in my instance.
Here's the aspects of my situation:
* Bought a Mitsubishi mini split through my contractor when having an exterior patio made permanent (stripped to posts and then turned into a real room with insulation, etc.). Cost for the split from the plumbing supply place (including lines) $2125. 15K btu, 21 SEER (it's been superb for the last four years so far).
* Contractor's HVAC guy said "I'll install anything that you get for $750", so I let them do it
* Electrician cost to run a 220 line to my split system location and install a whip disconnect was about $225.
total cost, including electrical work was $3100.
I also got a quote from an authorized mitsubishi dealer, and it was just shy of $6000. Highway robbery.
This should strike anyone as an odd thing - that's bordering on the cost of furnace and whole house air conditioner in my area (that's probably 8K).
Authorized installer also insisted on another $400 of plastic to cover the line in the interior (I boxed that in with pine and stain matched it to the flooring in the room). The installer's line when I questioned the price was "we have a lot of overhead".
If it's to be done again (if this unit poops out), I will order a unit off of the internet and install it myself. The only challenge with the units after you choose location is basic drilling and following instructions. If the paper instructions don't come with your unit, they are available via PDF online, no problem. I mentioned 25 feet, because most units come precharged (maybe all do), but mine stated in the instructions that it would require additional coolant if the lines to the interior unit were longer than 25 feet. You can probably plan around that in most cases to avoid going over 25 feet.
The lowest prices you see online are probably what the units will cost at a local plumbing supply place, so when you get quotes and the salesman is evasive about the actual costs of the unit, you'll know why. there's probably little that a mechanical service contractor can do that's easier money than installing these.
(no part of my 15k btu unit is heavy enough that you can't just lift it, either - they're really a dandy technology - and in my opinion, there's no good reason to give someone else $3500 for four hours of work. The terms of my unit give me a warranty regardless of who installs it. The "authorized installer" adds on 2 more years of parts warranty for the extra charge, but not labor. I'd hate to see what their labor charge would be on "warranty" service of a 6 year-old machine. I'll just replace mine if i'm that unlucky).