Re: Duh!
steve voigt
Now I need something that would be the next increment of coarseness. The Supershear I have would be too coarse (I think)
Bill, the super shear, or any mill-tooth cut, will leave a better finish than a mill bastard file. Coarseness of tooth does not equate to coarseness of finish. The teeth on a mill bastard, lathe bastard, or any similar file, are close together because they are designed to cut steel. The mill-tooth will cut cleanly, like a scraper, but because there is so much room for chip clearance it will also cut faster…the best of both worlds. I use mill-tooth files on brass as well as wood to get a finished or nearly-finished surface.
If you want something that works faster than a mill bastard, but don't like the mill-tooth files, get a medium rasp. The LV rasp I linked to earlier is pretty coarse. I don't have a recommendation for a medium but maybe someone who uses them does.






