Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Norris Vs. Stanley

Posts

Re: Norris Vs. Stanley

#26

Re: Pictures of Most of Them..

david weaver

...trouble with the phone editor on the last one.

I did also copy that design, probably from the brese kit at the time, without getting the kit. Raney Nelson advised me that my first pins or dovetails (I did them as square pins with a secondary angle filed into them) would not be very good and I'd be advised to make a small first plane.

Very impractical little plane for work of any significant size, though, especially if you camber it and reduce the cutting width further. Never could understand people building jointer planes and such from krenov kits with a 1 1/2" iron.

Re: Norris Vs. Stanley

#27

Re: Nice set!

david weaver

Thanks, Kees - in so much as I could be proud of just acquiring things (it makes me feel like a poser to some extent). I don't feel like a pig until I pull them all out and take pictures of them all at the same time.

Re: Norris Vs. Stanley

#28

Re: Nice set!

Kees

Ha ha. Don't worry. We understand. I just aquired an early Ward skewed double iron. Only because I like to see it close up.

Re: Norris Vs. Stanley

#29

Re: Nice set!

david weaver

Well, now you can make a panel raiser or a badger plane.

Good skew double irons are tough to find unless they are with a plane, and in that case, I just don't have the heart to rip the planes apart to rob their iron because they're usually in decent shape.

The other issue is that they're skewed for a badger plane, and if you try to stand them up more inside of a panel raiser, then the skew angle increases to something like 28 degrees and they blow out their abutments - a lesson that's learned most easily the hard way (a smarter way to make a panel raiser would probably to get one of the myriad of 30 euro badger planes and just attach a fence to the side of it to limit fielding.

That said, a skew double iron works fantastic and makes raising panels (or finishing that part after roughing with something else) really easy.

Re: Norris Vs. Stanley

#30

Re: Nice set!

Kees

It hasn't arrived yet. I will ask for tips when I know more.

Re: Norris Vs. Stanley

#31

Re: Nice set!

david weaver

Are you going to make a plane with the set? If I forget to mention anything, if it is a plane with abutments, don't go beyond 20 degrees of skew in your design, and even at that, there is some risk of splitting abutments from the cheeks (though you can certainly repair splits - I fixed my 28 degree disaster with screws - looks horrible but I can still raise panels with it.

I hate to say that it's ever OK to make a plane with a cross pin and a wedge, but there might be a case for it.

(I can't believe, by the way, what some of the fine planes sell for in the UK. I bought an 1800s badger plane with a ward iron and cap iron set for 18 pounds last year - plus a princely sum for shipping, but 18 pounds would've been the price in country). That and a try plane with a huge nearly unused ward double iron for 30 pounds. Can't remember the maker - but it was a well known maker and similar to mathieson planes in proportion and design of the wedge and mortise. And that was dealer price - 30 pounds...can't believe it.

Re: Norris Vs. Stanley

#32

Re: Nice set!

Kees

Yes at some point I'd like to make a plane with it, but first the damned thing will have to arrive!

Indeed prices are pretty good in England, yet.