Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

(Message Deleted by Poster)

Posts

(Message Deleted by Poster)

#1

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#2

That's a beauty!


Re: (Message Deleted by Poster)

#3

Re: Refurbished Try Plane.

Joseph Piotrowski

that is great work! i have a few wooden body planes in various stages of restoration that are not going as well.

any tips on removing screw in a filister type plane that about 100 years old?

Re: (Message Deleted by Poster)

#4

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#5

thanks!

Joseph Piotrowski

another sweet tool to buy!

Re: (Message Deleted by Poster)

#6

Re: Refurbished Try Plane - Loosening stuck screw

John Aniano in Central NJ

Hi Joe,

You might want to try another method, if the screw head is still intact. Heat up a beater screwdriver with a torch - not glowing, just hot. Boiling water hot and above, that's why the beater screwdriver is used - heating it in this way will take the temper out. Apply the driver tip to the head of the screw to transfer it's heat to the stuck screw. Usually the application of heat in this or similar manner will help loosen stubborn screws.

Of course, if the impact screwdriver works, use that instead. Not all of us have an impact driver!

John

Re: (Message Deleted by Poster)

#7

Tools used?

Gary Smyth

I've little experience on the tools used to true the bottom and the eye, cheeks and mouth. I suppose that the wedge had work too. As far as I can determine it's pretty exacting stuff. What tools were used besides the paper and float glass? Was ther a problem opening the mouth when the bottom was worked on?

Re: (Message Deleted by Poster)

#8

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#9

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#10

Re: Tools used?

Tony Memphis

Ok, now you are just showing off! nice work! Thanks for posting.

Re: (Message Deleted by Poster)

#11

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#12

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#13

Re: Tools used?

Frank D. in Montreal

I noticed one of your saws in another post, and wondered who made it. They are really nice (as are your planes). If ever you have time for a thread or short tutorial on making saws, I for one would certainly appreciate it.

Thanks for posting.

Re: (Message Deleted by Poster)

#14

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#15

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#16

Re: Tools used?

Gary B.

Hi Stewie,

Would it be possible to get another view of that shooting board plane? that looks amazing!

Re: (Message Deleted by Poster)

#17

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#18

Re: The decline of the wooden plane in Nth America

TomD

I don't buy that summary. Infill planes are basically metal planes, just as much as Bailey planes are metal planes, despite the handles. Infill planes despite their renoun just yell "kludge" There aren't many features that actually are beneficial. The dovetail joinery is hardly a superior method of manufacture, and the wooden infil is not up to much.

We really don't know whether wooden planes declined to start with. We do know that mass manufacturing picked up. But it all sounds like saying modern generations are more accomplished musically because more people own Ipods. But then wait a second, are there less people playing real musical instruments today? In general there seem fewer people willing to master musical instruments, or much of anything else currently, but the population is so much higher, maybe the same number of serious performers still exist. I mean, you just can't seriously perform many of the same functions with metal planes. Today, if there was interest, CNC could be programed to turn out synthetic, or metal molding planes. Though it isn't happening yet. The quality of goods just declined overall, and in that sense many wooden planes did disappear, but it wasn't up with metal down with wood. Metal planes have never seriously got off the ground.

Serious woodworking cultures stuck with wooden planes. I do agree with that.

There seems to be this view that wooden planes were displaced by metal planes. That isn't what I see. The culture of bespoke everything took a dive. Steve Jobs, a billionaire wore jeans and a T-shirt. Mass manufacturing of cheap goods destroyed hand woodworking, and also gave us metal planes, the relationship is in manufacturing vs bespoke, not a transition to metal tools. It wasn't progress it was a revolution.

Re: (Message Deleted by Poster)

#19

Re: decline of wooden plane - green vs dry lumber?

John Aniano in Central NJ

Hello Tom and Stewie,

An existential thought came to me about this subject. Perhaps the shift from wood to metal bodied planes was due in part to craftsman no longer using rived, green wood as their basic source material. We all know that planing green wood, especially oaks, often leaves brown or even black marks from the interaction between the moisture in the wood and the metal plane bottom. Wooden bottom planes in general do not have this problem. Might it be possible that during the latter part of the 19th century and the early part of the 20th century, as kiln dried wood became the norm, and as metal planes became available, the marking problem became a non-issue? There has always been furniture made from air dried wood making the type of plane bottom irrelevant. I'm just noting that the wholesale switch in the US from wood to metal planes may have coincided with greater availability of non-rived, kiln dried lumber. Is this just a coincidence or a true cause and effect? We will probably never know.

John

Re: (Message Deleted by Poster)

#20

Re: decline of wooden plane - green vs dry lumber?

Warren in Lancaster, PA

The marking of green oak timbers by iron planes is not really an issue. The surface of the wood dries quickly, so any marks can be cleaned off the next day with one pass of the smoothing plane. And you want to wait a day because the dryer wood leaves a finer surface from the plane than green wood does.

There were sawmills in America long before the metal plane era. By 1700 there were more sawmills (maybe hundreds) in New England than in Old England. Here in Pennsylvania there was already a sawmill when there were but a few hundred settlers, twenty years before Penn acquired the land. And more were built by the Quakers in the late 17th century.

Re: (Message Deleted by Poster)

#21

TomD -personal

Bruce, a MN Galoot

I have a bow limb repair question. Will you please email me? Thanks.

Re: (Message Deleted by Poster)

#22

Re: TomD -personal

TomD

What is you email? Glad to help if I can. Or start a thread in the main board, as it is a woodworking issue to some extent.

Re: (Message Deleted by Poster)

#23

Re: decline of wooden plane - green vs dry lumber?

TomD

There probably isn't a reason. Because there are multiple reasons and the people involved are not a constant either. I still like my suggestion that with the advent of the sewing machine, men felt that they better tech up their hand planes or be beaten in sophistication by the women folk. Nothing they could do would really catch them up...

There is no technical respect in which a metal plane is better. With the exception of some small types where the section in wood gets too small to be strong, and even there I think there are mostly options. What did happen is many of the reasons why a wooden plane was better stopped mattering. And in large measure that was because planes stopped mattering. Many modern woodworkers never use one at all. While I find them extremely useful in my shop, I think for the most part people use them today because they are fun, and they set woodworkers apart from the hords of router manipulators.

Re: (Message Deleted by Poster)

#25

Follow the money

Ron Harper

It got to tge point where metal planes were chesper to make the manufacturers then had to convincevthe buyers that they were better