Re: You folks are undermining .....
kim
I'm digging through some lumber that came with the house/workshop, to make several things like a futon platform, storm door, getting the shop itself fit.
Kim
Knowledge You Can Build On — Est. 1998
Re: You folks are undermining .....
kim
I'm digging through some lumber that came with the house/workshop, to make several things like a futon platform, storm door, getting the shop itself fit.
Kim
Re: Woodworking? Definitely.
Bill Houghton, Sebastopol, CA
Part of it is a production orientation, a combination of fixture setup, tooling, and refinement of steps. Much of it is probably practice. You become accustomed to the wood selection decisions involved, you make them, you take the stock through the steps, you allot 10 seconds to admiring each door as you check it out for flaws.
Associated with the practice is muscle memory. When you do the same procedure over and over, your body is much more efficient.
In my youth, I did sheet metal work for a short while. After six months, I could bend up certain flashings and other forms that we used a lot without any appearance that I was thinking about it: my body knew how to do the layout, how to make the cuts, how to make the bends, what to align when I soldered it, etc. I didn't say to myself, "now it's time for the big snips;" my body already knew.
Then it got to be winter, the housing market hit another one of its lows, and I got laid off; but that's a different part of the story.
Now, 41 years later, when I have to make those flashings, I still know the sequence of steps, but I have to think about each one, and what would have taken me a half hour, if that, takes me an afternoon, with luck.
We will skip lightly over the fact that I was 27 then, and I'm not now; but I think that, even at 68, I'd still be close to a half hour per flashing - it's not heavy work - if I did them every day.
Re: Jarra Anecdote
William Duffield
I've never had the opportunity to work with jarra. A while back, after you'd had a discussion here on its working properties, I was sitting over coffee with Warren and a friend of his.
Out of the blue, I changed the subject, whatever it was, and asked him, "Where did you get the jarra?"
His friend snickered and replied, "I smuggled it out of Perth in my backpack."
It's a small world.
Re: The search for the magic stick......
Derek Cohen (in Perth, Australia)
Roger, it was indeed a good way to grow up. The amateur code of then seems light years from the materialism and egocentricity prevalent in professional sport today. One needed to be competitive and assertive as much then as today, but we did this without linemen to check that we were truthful. We took for granted honour and respect.
A different era. A discussion best over a bottle of red at night.
Regards from Perth
Derek
woodworking? Ummm, no.
Bruce, a MN Galoot
Bill, you've been in my shop. The temp in it yesterday morning was +2F.
Actually, I have a couple hours' work left on a cabinet, just waiting for warmer temps (20F) next week.