New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Saw Vice Advice Needed!

Posts

Saw Vice Advice Needed!

#1

Saw Vice Advice Needed!

tom

I took some time to make a saw vice as a start to saw sharpening. My question is for those who have made their own-Do you use something on the face of the jaw to keep the saw from slipping? Mine allows the saw to slip a little.

I would like to shellac the piece but want to address this point.

Re: Saw Vice Advice Needed!

#2

Self stick.....

Brian Roberts

rubber strips made for bath tubs.

Re: Saw Vice Advice Needed!

#3

LV 88K59.05

roger lance

I keep this LV high friction sheet product in my shop.....many uses for it.....and would be a suitable solution for your issue.

Re: Saw Vice Advice Needed!

#4

Re: Saw Vice Advice Needed!

Jim Matthees

Bicycle inner tube (try your local bike shop)

Re: Saw Vice Advice Needed!

#5

Re: Saw Vice Advice Needed!

Thomas E Norton

That will work! As I VB work PT at the local bike shop!!

Re: Saw Vice Advice Needed!

#6

Re: Saw Vice Advice Needed!

Jim Matthees

Anthony Guidice came up with this. He used hot glue to tack the rubber strips down. I suppose contact cement would work, too.

https://www.amazon.com/Seven-Essentials-Woodworking-Anthony-Guidice

Re: Saw Vice Advice Needed!

#7

Re: Saw Vice Advice Needed!

Bill Tindall, E.Tn.

You have not provided any details. I will guess that the saw is held between two flat wood surfaces of considerable surface area. I would have thought that modest force would secure a saw under such circumstances. Is the clamping pressure uniform? Shellacing the surfaces is going the wrong direction . I would try roughing the surfaces with 80 grit sand paper.

Re: Saw Vice Advice Needed!

#8

Re: Saw Vice Advice Needed!

tom

The shellac will not be applied to the face of the jaws. I will solve the "grip" first before I apply a coat of shellac to the unit.

I would post a pic but I have never had any success with doing it on this site.

Re: Saw Vice Advice Needed!

#9

Re: Saw Vice Advice Needed! *LINK*

William Duffield

tom, The reason (or at least the first reason) you can't post pictures is because you have not created a profile. It lets us know whatever you would like us to know about you. I usually suggest we would be able to offer better advise if we knew a bit about what kind of woodworking you like to do, and what part of the world you live in, so we know something about your climate and weather conditions and your local tree species and sources of supply. We would NOT recommend you post the GPS coordinates or lock combination to you Bridge City Tools or Dalbergia lumber collections :D !!! More info about profiles and posting pictures can be found at the top of the page by following the the FAQs link.


FAQs

Re: Saw Vice Advice Needed!

#10

Re: Saw Vice Advice Needed!

William Duffield

I don't have a homemade saw vise, but my solution to the problem with an antique cast iron vise might help some people here. One jaw has a V-groove cast along its length. I glued a length of flexible transparent tubing of matching size into the groove. This is the tubing you find at the Borg. It comes in several diameters.

You might try a strip of leather with contact cement (e.g., 3M Super 77).

Re: Saw Vice Advice Needed!

#11

Re: Saw Vice Advice Needed!

Paul in NJ

You need to make sure the top of the saw Vise contacts the saw where the teeth emerge first. I found I didn't need anything additional. The other thing I did to make sure it held the saw tightly was to plane a slight hollow along the length of the top so the ends grip before the middle.

Paul Dzioba

Re: Saw Vice Advice Needed!

#12

Re: Saw Vice Advice Needed!

tom

Today I glued some strips of rubber from old bike tube on the jaws.

Re: Saw Vice Advice Needed!

#13

Re: Saw Vice Advice Needed!

Pedder

if the vice let the saw slip, it doesn't grip the saw good enough and need to be reworked. Soft materials will add a bit of grip, but will let the saw flex while filing. You look for very hard jaws, wich grip very closly.

Undercutting the jaws might help:

https://1.bp.blogspot.com/-wNs4loem7Mk/TbVZbWHwujI/AAAAAAAACM4/ZW6fTZhgCww/s400/DSCN0091.JPG

Cheers

Pedder

Re: Saw Vice Advice Needed!

#14

let us know if it works

Bill Tindall, E.Tn.

I would fear the rubber would leave the saw to flex a bit when filing and that would drive me nuts.

Re: Saw Vice Advice Needed!

#15

Re: let us know if it works

TomD

The Japanese saw vises come with rubber, works for those. The Distons don't, and they work also.

Re: Saw Vice Advice Needed!

#16

It worked!

tom

After an overnight in the clamps the rubber strip was trimmed and I tried it out. Perfect! Have just put a coat of shellac on the piece and will then start filing!