New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Windsor chair production

Posts

Windsor chair production

#1

Jack Guzman from Maine

Windsor chair production

Jack Guzman from Maine

I was asked to post a few chair pictures. This is the latest batch from my shop. I dislike finishing so instead of spending days finishing after building a chair,I pile them up so I can finish a bunch all at once. This first one is a continuous arm rocker that I painted with a recipe that Peter Galbert made to match a piece of old mahogany furniture in his house. It's interesting to do. The first coat is mustard yellow followed by a mixture of barn red and yellow. The final coat,a thin wash coat is a mix of red yellow blue and black.



This next is a set of fan backs to go with a fourth,previously made, to go around my dining room table. They are the same color as the rocker.



The next chair is a loop back that is the last of a set of four that I built for a local b&b. The color is black over red.



The last picture is of a high chair. Curtis Buchanan put out a set of plans for it recently and this is my first attempt at it. It has some flaws but I think the next one should come out alot better. This one is also black over red.



thanks for looking---Jack

Re: Windsor chair production

#2

Re: Windsor chair production

Joe shelton

Splendid, Jack. If I may ask, do you mix the paint to a thick consistency? I dislike trying to handle paint mixed to be as thick as happened when I followed package instructions. Unless I erred in following them, anyway.

And do you oil them after painting?

Re: Windsor chair production

#3

Timeless design

Bill Tindall, E.Tn.

I enjoyed looking. They are all so nice I would want to keep them!


Curtis told me our chair was made about 1800 somewhere in the Northeast, likely NY. Amazing how the design has persisted through the ages. I took this chair to Curtis to inquire about putting milk paint on it. Don't mess with it was his advice, so I didn't get to face learning to milk paint a chair.

Learn to spray and your finishing chores will be lessened. That said, chairs take some practice.

Re: Windsor chair production

#4

Jack Guzman from Maine

Re: Windsor chair production

Jack Guzman from Maine

The mix differs with every batch. Depends on humidity and other factors. First coats I like just thick enough to cover. I usually mix 1/1 and add water til I get what I want. It's a matter of feel. Trial and error til you get the results you want.

Yes,when I finish with the paint I rub the surface til it is shiny and then wipe on oil/varnish mix thinned with mineral spirits.---Jack

Re: Windsor chair production

#5

Jack Guzman from Maine

Re: Timeless design

Jack Guzman from Maine

Practice-that's right. My first chairs were pretty funny looking. It was hard getting all the angles down pat.My neighbor has a chair that looks just like yours.It was a popular style,still is.---Jack

Re: Windsor chair production

#6

I love the fan back chairs.


Re: Windsor chair production

#7

Re: Windsor chair production

Ron in Sterling, CT

Jack,

Wonderful work. Thanks for sharing the finished product.

Ron

Re: Windsor chair production

#8

Jack Guzman from Maine

thank you


Re: Windsor chair production

#9

Re: Windsor chair production

Hank Knight

Jack,

Those are wonderful! My favorite is the continuous arm rocker. I admire that style and I haven't seen many continuous arm rockers. Very nice, as are all of them. Well done.

Hank

Re: Windsor chair production

#10

Re: Windsor chair production

philip f Duffy

No flaws in my eye!! Well Done! Philip

Re: Windsor chair production

#11

Jack Guzman from Maine

Re: Windsor chair production

Jack Guzman from Maine

The high chair is presentable but the mistakes jump right out at me like neon signs.I won't point them out. ;) ---thanks---Jack

Re: Windsor chair production

#12

Jack Guzman from Maine

Re: Windsor chair production

Jack Guzman from Maine

Those rockers are popular. I made one for my church fair this past summer and I got alot of positive comments.thank you---Jack

Re: Windsor chair production

#13

Re: Windsor chair production

Bruce, a MN Galoot

I think you have this type nailed, Jack. Your turnings are crisp, authentic and good. Everything flows together and works. The details you've shown in other posts show the authenticity of attention to detail. You've made windsors your own, very nice!!

Re: Windsor chair production

#14

Jack Guzman from Maine

Re: Windsor chair production

Jack Guzman from Maine

Bruce,thanks for the kind words. I should hope I'm getting this. It is the only woodworking I do anymore. I work at it every day. I got caught up in it because I love the work.---Jack

Re: Windsor chair production

#15

Re: Windsor chair production

Hank Knight

I see flaws in everything I've built. As you say, then jump right out at me. No one else seems to notice. I've forced myself to ignore them and I'm no longer consumed by them.