New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Locking the Butler's Desk

Posts

Locking the Butler's Desk

#1

Locking the Butler's Desk

Brian Holcombe

Good morning! I'm on the home stretch now, wrapping up what's left to complete the Butler's desk. I've finished installing the lock for the desk drawer and detailed the installation here;

https://brianholcombewoodworker.com/2016/07/28/locking-the-butlers-desk/

Click the link above to see the entire post.

I hope that this might come in handy for those of you installing full mortise locks into cabinetry, of which there are not many (if any) tutorials online.




Re: Locking the Butler's Desk

#2

Re: Locking the Butler's Desk

roger lance

love the chamfer on the key hole.....really sets it off.....

Re: Locking the Butler's Desk

#4

Re: Locking the Butler's Desk

david weaver

Just outstanding clean details, and the mortises are spectacularly clean.

Re: Locking the Butler's Desk

#5

Thank you!

Brian Holcombe

Btw, I'm now also addicted to oil stones, haha.

Re: Locking the Butler's Desk

#6

Re: Thank you!

david weaver

Excellent. There are a lot of parallels between them and japanese natural stones.

* the love of carbon steel

* the reward for experience and technique

It's really excellent that the good ones of both types just come out of the ground and have been cut to shape, and they both produce the same type of edge (one that seems more constant, more consistent, and that is the same every time - plus both respond really well to a strop, both are great for knives, both leave a nice looking finish on wrought iron, both are excellent for razors, I could go on and on...).

Re: Locking the Butler's Desk

#7

Re: Thank you!

Brian Holcombe

Absolutely and I'm amazed at how flat I can sharpen free hand now, I can place a Matsui straight edge on the bevel of my Kanna across the width and front to back without seeing light under it.

Soft ark transitions perfectly to Yaginoshima.

That Shapton 320 can now take flight....into the nearest trash bin. I made a special shelf where I now hide all of my synthetic water stones.

Thanks again for your advice!

Re: Locking the Butler's Desk

#8

Re: Locking the Butler's Desk

Andrew F in Australia

Hi Brian,

Looks good - are you going to blue the heads of the brass screws to match the lock?

A

Re: Locking the Butler's Desk

#9

Re: Locking the Butler's Desk

Brian Holcombe

Thanks Andrew. I plan to do so.