New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Discussion-Engineering the bottom of case goods

Posts

Re: Discussion-Engineering the bottom of case goods

#26

Re: Discussions?

William Duffield

Yours is the much wider, even universal, view. My narrow statement was based on comments I have heard over and over in museums, where the docents and curators are explaining the differences between the older Jacobean and Wm&Mary styles and the later, and perhaps more elegant looking, high style Queen Anne and Chippendale furniture in their collections.

Re: Discussion-Engineering the bottom of case goods

#27

a variation on the theme

Bill Tindall, E.Tn.




One you leave traditional bracket feet I think you will find many examples of a vertical grained foot beside a horizontal rail right up to modern Studio Furniture. The first is 1790 Virginia the second 2014 Tennessee.

Re: Discussion-Engineering the bottom of case goods

#28

Re: a variation on the theme

William Duffield

I don't make French feet, and I'm sure a lot of other people here don't either. From your two examples and what little I do understand of the process, at least one of the curved outside faces is sawn from the vertical grain solid, bent, and a wedge of filler glued in behind it. I don't think you could do both the side and front surfaces that way, so I assume from the hints in the pictures, that the front face of the feet is a separate piece of veneer. Further enlightenment would be helpful. Is the side of the cabinet, extending into the foot, veneered, or is the side solid, vertical grain? There doesn't appear to be a transition between the side and the foot frame (where this discussion started). How is the front base molding (apron) attached to the foot and to the case bottom? Is it also veneered?

Re: Discussion-Engineering the bottom of case goods

#29

Re: a variation on the theme

Bill Tindall, E.Tn.

My objective was to provide another example of foot grain running vertical for visual effect. It sets off the foot when that effect is desirable.

Making French feet is a complicated process with some tricks to ensure success. I think I posted a detailed description of the process when I described building the "Federal Lite" chest of drawers for my daughter. The construction was done January to June 2012 so I presume the posts were in this time frame. Apparently I don't know how "Search" works because I could not find these posts. I think the titles would have been "French Footed Chest of drawers".

Re: Discussion-Engineering the bottom of case goods

#30

reply to questions

Bill Tindall, E.Tn.

Is the side of the cabinet, extending into the foot, veneered....solid

How is the front base molding (apron) attached to the foot mortised

Is it also veneered? I would have been a challenge to cave veneer :) It is a solid piece.

Re: Discussion-Engineering the bottom of case goods

#31

David, thank you for that information


Re: Discussion-Engineering the bottom of case goods

#32

A variation on the theme

Tom Colligan

Bill, I think you've followed Jeff Headley's way of making his Virginia chest of drawers. Would you be able to write a brief description of how you made these feet? Is it only one side is flared or are both sides flared? Thank you for any help you can offer on how to make these bracket feet.

Re: Discussion-Engineering the bottom of case goods

#33

answer

Bill Tindall, E.Tn.

What you asked for is hidden in the WC Archives somewhere. I'll recreate it and post to the Articles section. I need to get these drawers finished so it will be a few days before I get to it. I will send you the text and pictures to preview when completed.