Riven won't solve one of those problems
Bill Tindall, E.Tn.
Say I am a logger and have a walnut log for sale. I can sell it to a mill for XX$$ and they will saw it, it will be dried and sold to the place where you buy lumber. Sapwood is not considered a defect in walnut grading (more on that later) so there will be sapwood in what you buy that you don't use.
Or, I can sell the log to you for XX$$, you will discard the sapwood when you rive it. In both cases you paid for the sapwood you didn't use. You will save the expense of the middle man and drying(which is nearly costless to a mill burning wood waste). However, the log will have #2and #3 common lumber that you won't have a use for, whereas the mill that sawed the log will have a market for.
Anyone considering going into the Riven log business faces the same economics. Bottom line is that doing it yourself or finding a business that does(highly unlikely) is not going to save the cost of the sap waste. One way or another you will pay for it.
Personally, I don't have any sap waste. It gets used for internal framing- drawer bottoms and anything else that doesn't show.
A better solution to your problem is to buy a large clean log from a mill and have them saw it to your specifications. You could even arrange for them to keep the lower grades of lumber as partial payment. One large log will keep you in wood for many years.
I use this solution. I saw the logs to yield largely rift cut planks, at 2 1/2" thick. I can then make legs from this size or resaw to yield book matched panels.

For example, shown is a frame for a figured panel made from this rift cut lumber.