LV hand saw depth stop??.....
roger lance
I know its one day early....but, is this for real ??....or an April Fools deal ??
They got me confused.

Knowledge You Can Build On — Est. 1998
LV hand saw depth stop??.....
roger lance
I know its one day early....but, is this for real ??....or an April Fools deal ??
They got me confused.

Re: LV hand saw depth stop??.....
Jack Guzman from Maine
I clicked on add to cart and it took me to the next page. It looks to be real.Only $29---Jack
Re: LV hand saw depth stop??.....
TomD
That is where we are with this stuff these days, a lot of it seems like a joke.
Re: LV hand saw depth stop??.....
Bill Houghton, Sebastopol, CA
And even designed so you can tilt the saw for angles!
Re: LV hand saw depth stop??.....
North of the Border
This depth stop is in the same class as Rob Cosman's angle trainer (sharpening) and dovetail trainer (plumb cut): produced from a marketing perspective.
If a person needs this kind of gadget to do traditional woodworking, he's better off forgetting about hand tools and going plugged.
Re: LV hand saw depth stop??.....
AlanWS
It looks like it would convert a saw you have to the equivalent of a traditional stair saw. It controls the depth of cut, not the position or angle, so it does not seem in the category of crutch.
I don't see anything wrong with it, though I am not going to buy one. It resembles a lot of other tools that way.
Re: LV hand saw depth stop??.....
Ken Martin
The Disston 1914 catalog lists a "Gauge saw" that is a gauge added to a model 7 saw. Except for the magnets is it is similar to this.
Re: LV hand saw depth stop??.....
rob lee
Tom -
There are lots of precedents for this type of aid.
Not every person who does woodworking has the eyesight or motor skills to control saw depth.
It is not a product I would personally buy either, but then again - I am not the customer for it.
Cheers -
Rob
Re: LV hand saw depth stop??.....
Mark Nowicki Now, that is funny. (Monty Python would do magic with that line) Mark
<
Re: LV hand saw depth stop??.....
roger lance
Well said.....and to underline the point, just go over to the Messages board and look at the thread on "my newest must have" tool....."smileys the give away".....not this time

Re: If I was running a company...
david weaver
...and I had a whole bunch of customers asking for something, I'd make it, too.
For everyone one of us who wants to freehand everything, aside from folks who can't, there are also people who don't want to - perhaps they are repetitively making something that they sell at craft shows (my parents would be included in that), and they're interested more in making stuff for their market than they are building their skills.
it's an aid for making coffins
ian neuhaus
Agree.
I see nothing approaching a crutch with this tool.
saw depth gauges have a long history -- coffin makers for one used them
Re: it's an aid for making coffins
Bill Houghton, Sebastopol, CA
So as not to bury the saw too deep in the cut?
Right...
John in NM
One definitely wants it dead on for a coffin! 
Re: Right...
Bruce, a MN Galoot
Because if you're wrong, it would be a grave mistake.
Re: Right...
John in NM
Definitely a risky undertaking without one! 
making a coffin -- Puns aside ...
ian neuhaus
A coffin is narrow at the foot, wide at the shoulder and slightly narrower at the head.
The boards forming the sides of a "proper" coffin are kerfed so that they can be bent to conform to that shape. The tool used is a back saw, with a depth gauge to ensure all the saw kerfs have the same depth and thus produce a smooth curve.
a similar tool is used by some Lutherers
Re: making a coffin -- Puns aside ...
Bruce, a MN Galoot
Thanks for that. I often wondered how that side was formed.
Re: LV hand saw depth stop??..... *LINK*
Paul M
I use the fret saw below to get the proper depth slots on my fretboards. I don't know that I would trust one held in place with magnets like the one from Lee Valley. The Stewmac one has a plastic fence that screws to the blade of the saw to get just the right depth.
Stewmac Fret Saw