New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Marsh M5 Plane

Posts

Marsh M5 Plane

#1

Marsh M5 Plane

Joe McDade

I recently purchased a Marsh M5 plane off e-Bay for a little over $20, but it was in pieces. From what I could tell, the pieces were all there. Now that I have it in my hands, I'm almost sure they are all there. However, there is one screw on one "thing" that I simply can't figure out where it goes. Does anyone have any idea where I might be able to see any kind of assembly guide/instructions for the Marsh M5 plane? I'd like to restore this one to it's original glory as it appears to have never been used. Thanks for any help anyone can provide.

Re: Marsh M5 Plane

#2

Re: Marsh M5 Plane

Bill Houghton, Sebastopol, CA

Looking on the internet, the Marsh M5 looks like a fairly straightforward takeoff of the Stanley Bailey bench plane. The picture below may help (courtesy of Patrick Leach's Blood and Gore). Or Google "Stanley Bailey plane," and roam around looking for pictures.

But you should also cruise down to your local library and see what kinds of books they have on hand woodworking tools. Learning the terminology for the different parts of the plane will both help you explain your problem and aid in understanding what people are saying in their posts. And, once you get it assembled, the book(s) will help you learn how to use it.

Be aware that Marsh, like Stanley, may have used thread sizes that are no longer standard; depending on the screw, you may need to post a "Want to Buy" here.

If you get stuck and have a digital camera, you can post a picture here (note about that in next paragraph). That should make things clearer.

You haven't registered a profile here, so you're limited to one picture per post, from a photo hosting site like Photobucket (the "optional image URL" at the bottom of the posting page). If you have several pictures to post, or if you find yourself spending time here as you learn how to use this new-to-you hand tool, it's worth registering a profile. Instructions are at http://www.woodcentral.com/faq/profiles.html. What hangs people up most often is the failure to delete existing cookies from Wood Central (how you do that depends on your computer and browser); that's critical before you start the steps. Some general information on the benefits of profiles: http://www.woodcentral.com/faq/#howuse.

If you get stuck on that process, send up a flag here, and I'll e-mail you.

Bill Houghton, who's also a moderator here


img