New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Coved Frame-and-Panel

Posts

Coved Frame-and-Panel

#1

Coved Frame-and-Panel

Derek Cohen (in Perth, Australia)

Below is a link to my ongoing build.

http://www.inthewoodshop.com/Furniture/Coved-Frame-And-Panel.html

This focussed on taking these parts ..


.. and forming this joint ...


.. to create this curved panel ...


This is just a dry fitting at this stage. The emphasis here is the cove as a transition from frame to panel ..


Hopefully you will find parts to discuss or critique.

Too little available time this weekend for building. I am hopeful of completing the other panel next weekend.

Regards from Perth

Derek

Re: Coved Frame-and-Panel

#2

Re: Coved Frame-and-Panel

roger lance

Derek......Its rather unexplainable why your post lingered here for 10 days without response.

You are clearly in the major leagues of hand tool work. I'm barely in the minors. So, there is nothing that insightful that I can say which would be of much value to your effort.....except don't glue something together backwards.

Love following your builds.....nice to see how the big boys actually do it.

Re: Coved Frame-and-Panel

#3

Jim DeLaney, Austintown, Ohio

Re: Coved Frame-and-Panel

Jim DeLaney, Austintown, Ohio

That figured Makore panel is beautiful!

Great job (as usual) on the joinery.

Re: Coved Frame-and-Panel

#4

Re: Coved Frame-and-Panel

Derek Cohen (in Perth, Australia)

Hi Roger

Thanks for your kind words .. although I think that you are entirely myopic about my skill set. :)

More of a concern is why the posts on the Handtools forum are dwindling so? Is it the time of the year? Are more getting out into the good weather and doing less woodwork indoors?

As an observation, it is not just WoodCentral where there is a "reluctance" to discuss builds ... actual woodworking. Perhaps it is easier, or more interesting, or more can contribute .. when the topic is about a tool as opposed to technique?

I even posted on the Messages forum yesterday (why not - I do use powertools) to test that my typing fingers continue to function.

Regards from Perth

Derek

Re: Coved Frame-and-Panel

#6

Re: Coved Frame-and-Panel

Derek Cohen (in Perth, Australia)

A final few pictures to complete the section on the panels, as we move to planning out the drawer dividers.

Here is the second panel (on the right) ..


While it appears less figured than the first panel completed (on the left), it does have a special charm of its own. Here is a close up of the book matching and the central figure ...


This will give you a little more of an idea of the curve in the design ...



Regards from Perth

Derek

Re: Coved Frame-and-Panel

#7

Re: Coved Frame-and-Panel

roger lance

Derek.....you are coming along beautifully.....and the manner in which you have secured your project with the plumb bob is very informative as a method to make sure that all stays in alignment as you take the next step in laying out your drawer dividers.

Looking forward to your next installment.