New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Resuming the Spice box jewerly boxes

Posts

Resuming the Spice box jewerly boxes

#1

Resuming the Spice box jewerly boxes

Bill Tindall, E.Tn.

I took some time off from making stuff and among the put off tasks that were confronted I improved my dovetailing arrangement.

Lighting- I don't have windows. If you have windows you may not appreciate how much better one can see in a windowed shop. My bench is well lit but for dovetailing one needs light both on the top of the piece as well as the front. My well lit bench served poorly for this task, being very bright on the top, dark on the front, with a light colored background (the bench top). The light colored foreground closes up one's pupils making the front of the vertical board dark. At the advice of my brother in law, the lighting engineer, I darkened the foreground with the navy towel.


PIC 1 shows the tools I will use for these tiny drawers and the well lit front and top of the wood.

PIC 2


I get the lighting on the front by placing a sheet of white Styrofoam insulation board behind the vice, as shown in the picture. The result is dramatic. The reflected back light and the dark foreground which opens one's pupils results in sharply defined lines from the pilot gel pen.

PIC 3


During the "time off" I made a better dovetail marking jig inspired by Mr. Lance, as was previously discussed here on WC. I like how it worked for some practice joints.

Re: Resuming the Spice box jewerly boxes

#2

Re: Resuming the Spice box jewerly boxes

roger lance

Bill.....its good to see you back at the bench. That's very interesting how you can manipulate backgrounds/etc to enhance visibility.

I can't take credit for that jig as I got the idea from a fellow in England or France who made them for sale.....don't recall his name.....but, I'm glad you find it helpful.

Re: Resuming the Spice box jewerly boxes

#3

Re: Resuming the Spice box jewerly boxes

TomD

You have the perfect set-up there for using a mirror. Your vice jaw is wide enough, and it would kill the dark face on your vertical workpiece, which is nice when sawing, which I gather isn't the purpose of this particular piece.

Re: Resuming the Spice box jewerly boxes

#4

Re: Resuming the Spice box jewerly boxes

Kees

Aha, so I still make a chance to finish my spicebox before yours? (Of course you make three and I only one).

I spend some time on the hardware. I made myself a lock, because I wasn't happy with the factory made ones. The picture shows the lock and key before the final sanding. I am still a bit at a loss about how I am going to finish it. It looks way too new at the moment.


img

Re: Resuming the Spice box jewerly boxes

#5

Re: Resuming the Spice box jewerly boxes

Kees

BTW, I recognise the difficulty of seeing the marking lines. I use an old desk lamp that I can position and bend over the board in the vise. That gives me direct light where I want it.

Re: Resuming the Spice box jewerly boxes

#6

Re: Resuming the Spice box jewerly boxes

john Veerkamp

etch your lock with acid (toilet / drain declogger)

Re: Resuming the Spice box jewerly boxes

#7

Re: Resuming the Spice box jewerly boxes

Patrick Gibbons

Very nice lock. Would love to see how it works and how you made it. I would use some gun bluing on it, or if the mechanism would tolerate it, oil it and bake in the oven to blacken and protect the surface.

Re: Resuming the Spice box jewerly boxes

#8

Re: Resuming the Spice box jewerly boxes

Kees

You can see how I made the lock on my blog: http://seekelot.blogspot.nl. The inside doesn't looks so great, it's all a bit hamfisted. But it works and doesn't look too awfull from the outside.

I have been experimenting with a galvanic process to blacken/brown the steel. Cleaning vinegar (8%) with a teaspoon of salt. And then with 12 Volt, 1 Amp, minus on the object and plus on the anode. It goes pretty quick and looks the part. I also ordered some Ferric Chloride for more experiments.

But I'm hijacking Bill's thread! Sorry about that. While my spice cabinet is going to look quite different, I got some inspiration from Bill's build allready.

Re: Resuming the Spice box jewerly boxes

#9

Electrochemistry coloring

Bill Tindall, E.Tn.

What you are attempting will work but keep in mind that the chemical activity will be largely confined to the part of the anode that faces the cathode. You may need to rotate the lock to various positions to get a uniform color. And you will need to remove all traces of chloride from the treated metal or rust will be in your future. Personally, I would not use this recipe because of the chloride risk.

Re: Resuming the Spice box jewerly boxes

#10

Re: Resuming the Spice box jewerly boxes

Joe in a Cleveland suburb

Glad to see this update.

I had been wondering about it...

Re: Resuming the Spice box jewerly boxes

#11

Re: Electrochemistry coloring

Kees

Indeed the process only works in a very straight line.

Chloride? Do you mean when I use ferric (III) chloride or does the galvanic process with vinegar and salt also produce chloride? These are two seprarate trials for me.

Of course, salt also contains chloride...

Re: Resuming the Spice box jewerly boxes

#12

Re: Electrochemistry coloring

Bill Tindall, E.Tn.

When either ferric chloride or sodium chloride is dissolved in water the result is chloride negative ions floating about in the water. (the details of how they get there from sodium chloride is different from ferric chloride but the result is the same). Some will eagerly attach to the iron surface and if left there this surface may some day encounter a damp environment and corrosion is off to the races. In a chloride free solution, making the lock the cathode for a brief time is an effective way to be rid of any sticky chloride.

There is another concern. It is possible to oxidize chloride to chlorine gas at the anode in this acidic environment. Do these experiments in an area well ventilated.

Re: Resuming the Spice box jewerly boxes

#13

Re: Electrochemistry coloring

Kees

I am now not sure about this. I have in my experiment the plus connected to the anode, and the object is connected to the minus. NaCl when dissolved in water forms Na+ and Cl-. The Cl- is attracted to the plus, thus not to my object! I would say that my object is save.

But chemistry is a long time ago, so I might have missed some obvious clue in above explanation.

Re: Resuming the Spice box jewerly boxes

#14

Things are way more complicated

Bill Tindall, E.Tn.

Answered in email..