New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Season's Greetings.......

Posts

Season's Greetings.......

#1

Season's Greetings.......

roger lance

Right now I've got two deer bedding down in my backyard.....resting in my leaf piles from the fall raking......


and there are large flights of Canadian geese overhead....honking away loudly as they move to a nearby pond to spend the day getting ready for the big flight south.

Its a great time of year....Happy Holidays to you and yours.....its time to get back down to the woodshop and make something.

Re: Season's Greetings.......

#2

I see......

Bill Tindall, E.Tn.

Loin chops, barley stew, Chilli, etc. Yum :)

Every year I make plans for a smoothly organized holiday season, and then......

I have a complex carving board, several ornaments and a coffee table due Dec 25. Spent all yesterday fretting over what to do for pulls on the coffee table drawers. To my surprise there isn't much hardware for small drawers so I am fashioning some pulls from Blackwood, the most miserable wood in nature to work (but it looks nice against walnut). Haven't worked on the Spice boxes in several weeks. I'd post pictures but my WC account is screwed up.

Re: Season's Greetings.......

#3

Re: I see......

roger lance

a doe with her yearling.....she's been coming here since she was a fawn.....been kind of a tradition I don't want to break.

I am looking forward to seeing your chest.....just watched some video with Christian Becksvoort making drawer pulls.....I know yours will look great.

Re: Season's Greetings.......

#4

Re: I see......

TomD

Is there a link for that. I have some pull I imagine will be similar, not that I need a video, but it will allow me to put off the cold shop for a while longer, like till maybe May.

Re: Season's Greetings.......

#5

Re: I see......

roger lance

A couple of weeks ago there was a discussion on making graduated drawers and I did a little looking around and saw that video by C. Becksvoort who is famous for making Shaker pieces with graduated drawers. This video was done on the drill press with rasps.....but it seems that I also remember a video/article by Becksvoort on making pulls on the lathe. If I can find it again, I'll post it......or if someone else has it, please put it up.

Re: Season's Greetings.......

#6

Re: I see......

roger lance

Try https://www.youtube.com/watch?v=on-FxIRSRuE

Re: Season's Greetings.......

#7

Hardware for small drawers

Denny

Bill, I like the Lee Valley traditional ring pulls, I'm using them on a project now with drawers that are 2 1/4" tall (inside dimension). There's a trick to make them look good and to get them to fit in a drawer that size, if you're interested let me know and I'll fill in the details.

Denny

Re: Season's Greetings.......

#8

A couple weeks ago...

John in NM

I was driving over to a friends house for a poker game. It was after dark and as I turned a corner I thought "man, that is one dull Christmas lawn ornament". Then I realized it was a real deer :D

Between the grass, occasional fruit tree, and lack of hunters, we actually have deer hanging out in town all the time :D

Re: Season's Greetings.......

#9

Bring on the details

Bill Tindall, E.Tn.

I'll bet lots will be interested.

Re: Season's Greetings.......

#10

Re: Bring on the details

Denny

Bill, the ring pulls have a staple with two prongs that are meant to be folded back and nailed into the back of the drawer front. With a small drawer, the top prong is too long to fold down, it will extend past the top of the drawer. You can just cut the top prong short so it won't extend past the back of the drawer front, I use 6" end nippers. A small drawer doesn't need the extra strength of the 2nd prong.

The rings are usually pretty ugly when you get them, often a bit rusty and not really finished. To get a nice black finish on them, I set up a small torch and heat them up for a few seconds and dip into Johnson's paste wax and just repeat the cycle of heating and waxing. The wax burns off each time, and after a few times the pulls have a nice black finish that's pretty durable. You do have to be careful though, if you're doing a lot of rings, after a while the can of wax can melt and even start burning. DAMHIKT.

Hopefully this is all pretty clear, let me know if you have questions.

Denny