New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

How to re-handle a peavy question

Posts

Re: How to re-handle a peavy question

#26

Re: What is the spike used for?

TomD

I have never really used mine. I can visualize the similarity to the on the water tool, but don't really duy the idea that it would sit there all that time without any true use.

One thing is one can push with it, where exactly one would want to do that... One can brace a long on a hill, while others roll it. And one can plant the tool in the ground so one can find it.

The Wiki article gets it all wrong. Suggesting the hook is used after first stabbing the log with the point.

It does have a picture of a guy poking a floating log with the tool, which might only be useful in close proximity to the point where the log is rolled from the water. It is clear in the picture that the point and hook can't be used as described, and the hand position is absurd for manipulation of the log by point only.

http://en.wikipedia.org/wiki/Peavey_%28tool%29#mediaviewer/File:Peavey_2_%28PSF%29.png

The Wiki article mentions the originator was from Maine, so maybe the pushy shovy explanation is the right one. But the tool is far too short to be generally useful.

http://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CCUQtwIwAQ&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DupsZZ2s3xv8&ei=BMMvVOrNH8f5yQSd5ICAAQ&usg=AFQjCNEHiGzZlFntorx0QGFaIaOaTMWLYQ&bvm=bv.76802529,d.aWw

Re: How to re-handle a peavy question

#27

Dale Lenz

One way the spike is used....

Dale Lenz

is for turning the direction of the log. Say you have a log that is laying crooked to the log deck, right side of log is closer to the log deck than the left side. The person on the right side of the log, pokes the peavey in the ground in front of the log. The left side person rolls the log with the peavey to get the log parallel with the log deck. Hope this is clear?

Re: How to re-handle a peavy question

#28

Re: What is the spike used for?

Bob Hackett

The prpblem with using a tool with this much metal involved out on the water is that if if you drop it then it goes straight to the bottom. That`s a lot of money to lose compared to a cant hook.

Re: How to re-handle a peavy question

#29

Why do you need a spike to do this ?


Re: How to re-handle a peavy question

#30

Dale Lenz

In my neck of the woods...

Dale Lenz

a spike goes into the ground easier than a non spike.

http://www.forestryforum.com/board/index.php?topic=7409.0

Re: How to re-handle a peavy question

#31

that was interesting

Bill Tindall, E.Tn.

thanks for posting

Re: How to re-handle a peavy question

#32

Here on the coast of Maine...

Bob Hackett

Ground = stone so that may explain why we find the spike to be a less useful accessory. :)

Re: How to re-handle a peavy question

#33

I remember learning in Jr. HS...

John in NM

That if you could straighten the coast of Maine out, it would be as long as the rest of the eastern seaboard :D All those rocky inlets!

Re: How to re-handle a peavy question

#34

Poking holes in boots

Bruce McCrory

I sure liked the spike when I used peaveys years ago.

My experience was in the field, on gravel, asphalt, rock, forest duff, and ashes. Those lacking the spear point were troublesome in every way but rolling a perfectly sized cylinder in one direction. Given no other choice, those with a bigger hinge fork were taken and later "traded" for better ones, after dark.

Also, the pointed ones lived longer than bunged up hickory and jammed hook hinges.

Re: How to re-handle a peavy question

#35

I have two cant hooks that I use on my mill,

Keith Newton

And I've been thinking about getting a Peavey with a spike. You state, "The Wiki article gets it all wrong. Suggesting the hook is used after first stabbing the log with the point." I think this would be one of the best reasons to get it. I usually only go after large logs, and I'm here to tell you that it is often pretty hard to get the hook to grab unless there is a bump or something already there to give the hook point to start into. With that end pike, all it would take it a quick toss, to offer a pilot hole.

Now that I am thinking of it, I might just drill the end of both of these and add my own.

Re: How to re-handle a peavy question

#36

Re: I have two cant hooks that I use on my mill,

TomD

That is an interesting thought, though not what is illustrated with the article. It was not a case of stabbing the log, then using that hole to acquire the hook, it was a matter of stabbing the log, and then the hook with the point still in the log, grabs the log. The geometry just won't let that happen. I know what you mean about getting a grab. I often use knot holes, etc... to latch on. As with many things a sharp hook helps.