New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Why loose tools in a tool box? Why even a tool box

Posts

Re: Why loose tools in a tool box? Why even a tool box

#26

And a fun trip through an old tool box *LINK*

Simon St.Laurent - Dryden, NY

A friend just sent me this. I think the bottom photo is part of an old framesaw, but it's all interesting.


http://m.imgur.com/a/tDWbP

Re: Why loose tools in a tool box? Why even a tool box

#27

Wow

Bill Houghton, Sebastopol, CA

Thanks for that link. If it was put up by your friend (rather than a link he found), encourage him to do a more comprehensive photo survey of the tools. There are some intriguing tools in there that I'd like to get a better look at. The one triangular reamer with the wood handle and the "T" bar through it is really neat.

The marquetry of the horse on the lid looks to me like bird's-eye maple for the horse and banding and mahogany crotch for the background. Nice stuff.

He mentions that the marettes (the American term is wire nuts) are porcelain; this was actually the material used before Bakelite and later plastics. I have some of them around still, I think, from stripping out some of the (frighteningly) old electrical work in our 1895 house.

Down below the blueprints, where he starts showing tools in detail, he shows a small backsaw and speculates that it was for a miter box. Unlikely; it's awfully small. It could have been used in a miter block, but was probably mainly used freehand.

Further down, in the pictures with the mallet, he shows "some sort of gouging cutter[s]," which this crowd will recognize as bolstered mortise chisels.

Neat box. Clearly, his great grandpa was a finish carpenter. He should be proud to have that in his possession, in as good condition and as well-stocked as it is.

Re: Why loose tools in a tool box? Why even a tool box

#28

I do take perverse pride in it.


Re: Why loose tools in a tool box? Why even a tool box

#29

Re: And a fun trip through an old tool box

William Duffield

The last photo is one arm of a bowsaw, not a frame saw. Another photo shows both arms , both handles, the broken blade that is attached to the arm in the last photo, another blade, and the cord. Too bad the very charming volute on the end of the other arm appears to be broken off. You should also look for the windlass. If you do a Google image search for bowsaw, and ignore the tubular steel frame pruning saws, you should get a good idea how these are used.

Re: Why loose tools in a tool box? Why even a tool box

#30

Re: My handtool space is 6'x9'

Bruce McCrory

That's a luxury!

My very small newest bench is awaiting area to be finished--and stored. It will have built-in wheels so the whole can roll into the drive. It will also contain the tools, so jostling must be contained by baffles; or other means.

Re: Why loose tools in a tool box? Why even a tool box

#31

Re: As for the loose tools part...

Bruce McCrory

I really like the t-shirt solution! As long as it isn't white.