New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Custom Tasai Chisels

Posts

Re: Custom Tasai Chisels

#26

Re: Manny Hernandez

Allen Fulmer

Thanks for the help. I actually did email Jay at the dojo this past week about some japanese hand tool courses as well as any possible info on these chisels and he completely blew me off. I accidently forgot to sign my name at the bottom of the email and he emailed me back saying he wouldnt respond to someone who he didnt know their name. So i sent him another email apologizing for not listing my name and went into detail about what I was interested in as far as classes and such and I never heard from him. Pretty disrespectful in my opinion.

Any other ways I might be able to reach him?

Re: Custom Tasai Chisels

#27

Re: Tasai very-thin

Wiley Horne--So. Calif.

Allen,

I agree with the 12mm for general use, and the 6mm would make an interesting experiment since it is a good size for paring the waste on drawer side dovetails without dinging the sidewalls of the socket.

I think the verithins only come 'usu' style. However, if you come across any shinogi style with thin lands, it would make a good post here and probably a good acquisition. I got around the thin-land problem by having Chutaro Imai grind 10 degree bevels on the sidewalls of a set of shinogi slicks.

The only non-customized Japanese chisel I have seen with thin lands is a vintage Kiyotada shinogi slick; I dunno whether anyone makes them any more. Again, ask Stu or your favorite vendor. I got that Kiyotada from So Yamashita at www.japan-tool.com, who has some vintage tools that sometimes he will sell. And he is a great contact and pal anyway.

A little extraneous information. I checked overall blade thickness on three slicks--the Tasai verithin 15mm, a Funahiro 12mm usu, and an Imai 12mm shinogi:

-Tasai verithin.......... 1/8"

-Funahiro usu............ 3/16"

-Imai shinogi............. 7/32".

The shinogi look delicate, but actually they're quite stout, because the resistance to bending is proportionate to the third power of the thickness in the direction of bending--so that high center makes the shinogi stout.

Wiley

Re: Custom Tasai Chisels

#28

Re: Manny Hernandez

Howard Pollack

I'd check the various hand tool and Japanese woodworking forums. -Howard

Re: Custom Tasai Chisels

#29

Re: Tasai very-thin

Allen Fulmer

Thanks for that info Wiley.

I will definitely look more into either Usu or Shinogi as far as very thins. The overall thickness of the chisel doesn't concern me as much as the very minimal lands for getting into the corner of dovetails. I will talk to Stu, so far he's been the only Japanese tool vender I've death with. Hes been great so far, so I haven't found a need to go elsewhere. He's a busy man, very busy, but he's helped me out greatly.

I did actually email Japan-tool but his website says he's not accepting new customer emails or new orders at the moment so i don't have high hopes of hearing back from him. I was interested in a few things in his website namely some kiyohisa stuff, even though the wait is tremendous. So well see if I hear from him.

Re: Custom Tasai Chisels

#30

Re: Manny Hernandez

Allen Fulmer

So I just received an email from Manny Hernandez. Apparantly Jay from the Dojo put him in contact with me. I found out everything I needed to know. Pretty sweet.

Re: Custom Tasai Chisels

#31

Re: The real story

Tom

"

Tom,

I'm absolutely a user. But at the same time i want to own a few eye candy chisels. Most of my chisels are/will be "working" chisels."

Got it, and that is as it should be. I am a big believer in having nice things. While practicality is great, and is probably the real tradition of our activity, I do think that as we love to make nice things, there is a degree to which it follows we should support them if we can and want to. That said, my concern with the tourist chisels is that the makers are laughing at us and supplying crap to that market. Simple solution would be to see what you are buying before you buy it and/or have an iron clad right of return.

"I don't know a ton about the tempering process and such, but are you saying there's a good chance that the socket is black with a blue hue due to hear during the processes? I'm trying to understand as best I can."

In general yes. There is a spectrum where each heat leads to a colour, so straw, is 400F, blue is 650, etc... It varies with the actual steel. The colour can be used to determine the point to quench the steel at. And the oxide layer can be left in place to protect the steel against corrosion.


The one thing I was overlooking was that with mokume, unless one of the layers was something like nickle, you would have to clean off the colour to allow one to etch the pattern. So that led me to think that possibly the colour is chemical blueing.

Re: Custom Tasai Chisels

#32

Re: Diamonds.

Tom

David, do you do jewelery. I need some advice on setting stones.

Re: Custom Tasai Chisels

#33

Re: Dovetails

Tom

In my mind, dovetails are a power cut, so I actually prefer a beefy chisel. Just get them with 83 degree sides all the way up. That with the kerf will get you where you need to go. The extremely low angle bevel has nothing to do with doing dovetails, and to my way is actually bad for it.

Re: Custom Tasai Chisels

#34

Re: Dovetails

david weaver

Unfortunately, I don't do jewelry. Maybe sometime in the future.

I agree completely on the chisels in dovetails. They are a commodity joint and can be done cleanly and handsomely in hardwoods with heavier chisels. Even when they're not a commodity joint, they can be done with less delicate chisels (I'd rather do them without delicate chisels and without crumbly edge angles).

If you track down george wilson on SMC (I don't know if you ever go over there), I'm sure he can tell you what you need to know about setting stones.

Speaking of, I wonder where David Barnett went.

Re: Custom Tasai Chisels

#35

Re: Dovetails

Tom

Thanks, David, I got my Davids mixed up. :)