We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
With my wife and kids hoping to pass on the fond fall time memories I have from my childhood at the apple orchards of Southeast Michigan. Chief among those memories was the apple cider, which was so much better at the orchard than the stuff you get in the store. The orchard cider was better because it wasn't pasteurized (it makes a HUGE difference in taste). Much to my chagrin, Minnesota requires all cider to be pasteurized (jerks) so the apple orchard just became a really expensive way to get crappy cider.
I immediately resolved to make my own cider press so we can enjoy un-pasteurized cider next year. Then I realized that I don't know much about cider presses.
What kind of wood would I use? I'm thinking cherry or maple or other food safe woods.
Do I have to make a coopered barrel?
Does anyone know of any good resources on making a traditional cider press?
Is there anything more to it than just a barrel, chute, and press?
Can't add much but I know that The Practical Woodworker, in the 4 volume version recently released, has a plan for a butter churn and also how to cooper together a bucket. Lee Valley may still have some available.
About thirty years ago I bought one at a farm sale and built it completely. They were quite common on small farms in PA. They had a grinder in cast iron aand a large crank to crush the crushed apples. They are of no use to a commercial press but you might find one at an antiques shop with the wodden frame broken or worn out. The iron parts are what you need. It was a fun project and has been used by many groups since then.