New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Utility Knives

Posts

Utility Knives

#1

Utility Knives

Kevin French

Just a quick heads up on a great product.

I've bought several utility knives and found many more in the dump, but the LENOX Gold® Quick Change Retractable Knife is by far the best utility knife I have used.

It's has a quick, foolproof, no tool, blade change feature.

I've been reinsulating and residing my old house and this knife has really worked great. There's no stopping to find a screwdriver or fight with the blade as in other 'no tool needed' knives.

http://www.lenoxtools.com/pages/Product.aspx?productId=UtilityKnives

Re: Utility Knives

#2

Re: Utility Knives

William Duffield

Another excellent choice, but probably a lot more expensive than the Lenox, is this folding one made by Bessey:


It holds 5 extra blades in the handle. It retails at $20 or €20. When I worked in retail, selling tools and machinery, everyone who worked in the store had one.

Re: Utility Knives

#4

Re: Utility Knives *LINK*

Paul Dzioba

I still prefer the Stanley 199 fixed blade.



It just feels better than the retractables. I like the way it holds the blade solidly without wiggle and I don't have to worry about the blade suddenly retracting when I bear down on it. In the shop the fixed blade is not a bother. Working on carpentry or building projects it resides in my tool belt, always ready to go. I even re-sharpen the blade when it gets dull rather than change and toss it. I always carry a 3 blade pocket knife for general use.

Regards,

Paul Dzioba


http://www.grainger.com/Grainger/STANLEY-Utility-Knife-4A804

Re: Utility Knives

#5

Re: Utility Knives

Kevin French

I like the ability to change out the blade as soon as I start to dull the blade, no tools. I have the rigid lock blades but on this job this one works great.

Re: Utility Knives

#6

Me, too

Joe shelton

I keep one in the pouch and one at the bench. The only better one I know is (was) the Stanley Fat Max fixed blade.

Joe

Re: Utility Knives

#7

Jack Guzman from Maine

orange lutz #88

Jack Guzman from Maine

Some years ago my local hardware store started carrying these. I tried one and never looked back. Best utility knife I've ever used. I use them all the time in my job as a carpenter.---Jack

Re: Utility Knives

#8

Maybe that guy was right

Winton Applegate

Perhaps that guy who said we should get out more

. . . is . . .

right.

The photos comparing the knives are mine. My review is under "Barkingmad"

http://www.amazon.com/Allied-International-82067-ProGrade-Utility/dp/B000IBJRIW/ref=cm_cr_pr_product_top

I now use a Milwaukee at work

http://www.amazon.com/Milwaukee-48-22-1910-Side-Utility-Knife/dp/B003I85GTG/ref=sr_1_sc_2?ie=UTF8&qid=1381985569&sr=8-2-spell&keywords=Milwakee+box+knife

but various ones at home.

I was unaware Lenox made a box knife. I am a fan of their metal cutting saws.

I have at least five or six of their high tension hack saw frames (between those at work and at home). I have a different tooth count blade in each one so I don't change out blades but just grab the saw I want and go. (with a high tension hacksaw frame and a fourteen tooth blade in the frame tensioned to five or six turns it is no big deal to cut through a solid one inch bar of mild steel).

Re: Utility Knives

#9

Re: Maybe that guy was right

Kevin French

I have a couple of Stanley's version of the ProGrade 82067 Utility Knife. One of them the quick change doesn't work. I keep telling myself I need to tear it down and figure out what's wrong with it, but now I have two Lenox so it sits on the self.

Re: Utility Knives

#10

I like those too

John in NM

I have an orange one and a yellow one. Mine are getting old and bent up a bit, but they still work better than any with plastic parts once those parts start to wear. The hardware store where I bought those is long gone, but I found one in Las Cruces that still sells glazing putty - I bet they carry those knives too :D

I've used a few Stanleys with quick change blades. Its nice while they work, but I don't expect them to work for long, certainly not for years.

Re: Utility Knives

#11

Glazing putty is alive and well

Kevin French

Just finished reglazing 10 windows in my barn.

Re: Utility Knives

#12

Kinda rare out here...

John in NM

But when I find it, it's an excellent barometer for the identification of "proper" hardware stores :D If they have glazing putty, they probably have 4 or 5 other things that I'm looking for, not to be found at Home Depot or Ace :D

Re: Utility Knives

#13

I'm not always traditional

Bill Houghton, Sebastopol, CA

Some of the newer glazing compounds have real advantages over traditional glazing putty (whiting in oil, as I recall), mainly that you don't have to wait two weeks for the compound to dry so you can paint.

However, we are four windows away from not needing it anymore in our house. Modern windows don't much use it. Even the window we had built by a "traditional" window maker didn't use it.

All that said, I do dearly love the feeling of getting a good putty run going, and watching the putty settle in to a nice beveled bed bonded to glass and wood. Some of the old technologies offer a lot of sensory feedback that rewards skillful work, and that's one of them.

Re: Utility Knives

#14

Jack Guzman from Maine

window glazing

Jack Guzman from Maine

We have plenty of old style window sashes around here. One of the jobs I do for my clients is renewing old sashes. I just recently repaired a 34 pane barn transom that was in bad shape. That was a lot of putty. ---Jack

Re: Utility Knives

#15

I like to putty

Kevin French

I needed to replace some broken glass in the barn window, which got me looking at the rest of the windows. I needed an escape form the other work I was doing and puttying is a great escape.

Ten windows later, their prime waiting for the next break in my Clapboarding project to be painted and install.

Re: Utility Knives

#16

Re: Glazing putty is alive and well

Bruce McCrory

In another life I repaired greenhouse glazing, besides nurturing the plants, flowers. The putty would dry and disintegrate, letting individual panes slide and lodge into the underlying, lower lap. Walking on top of beds 20-feet below was . . . different. My mind has erased whether it was metal, metal and wood, or wood framing.

You can have that stuff.

Before that, and in another previous life, we dug the soft putty from freshly smoothed and painted window trim. That's when I learned to 'glaze'.