New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

A Cabinetmaker's Toolchest....

Posts

A Cabinetmaker's Toolchest....

#1

A Cabinetmaker's Toolchest....

roger lance

ran across a series of videos on YouTube of a pure hand tool build of a toolchest.....thought that you might also enjoy viewing these videos as many of the tools, techniques, and procedures shown in this 13 video set are also the subject of much that is discussed here.

Go to YouTube and type in: A Cabinetmaker's Toolchest - by Tom Fidgen

an interesting and relaxing series.....enjoy.

Re: A Cabinetmaker's Toolchest....

#2

Re: A Cabinetmaker's Toolchest....

Winton Applegate

Roger,

I have not watched the series yet but THANK YOU !

Re: A Cabinetmaker's Toolchest....

#3

Re: A Cabinetmaker's Toolchest....

CJ in MPLS

That was a lot of fun. Perhaps it was the camera, but the woodworking in the video had one heck of a lot more patience that I do. Which is probably why I'm getting good at fixing errors.

CJ

Re: A Cabinetmaker's Toolchest....

#4

Re: Toolchest?

Tom

Looks like a tool box, and pretty limited capacity, but it is a nice piece of work for sure.

Re: A Cabinetmaker's Toolchest....

#5

Re: A Cabinetmaker's Toolchest....

Chuck Bjorgen

I watched the full 13 episodes of the tool chest build last night and was impressed. Seems that Mr. Fidgen likes his LV bevel up planes. I would have liked to see the chest with tools in it to see how he made use of the compartments. Only saw the back saws in place. I did subscribe to his YouTube series though and will watch more of his efforts.

Re: A Cabinetmaker's Toolchest....

#6

Re: A Cabinetmaker's Toolchest....

roger lance

Winton....you're very welcome....hope you enjoy watching it.

Re: A Cabinetmaker's Toolchest....

#7

Re: A Cabinetmaker's Toolchest....

roger lance

CJ....he was very methodical and evenly paced in his work.....I'm a blended ww and would have turned to my tablesaw on a number of occasions in the videos.....but that deliberate approach had its appeal.

Re: A Cabinetmaker's Toolchest....

#8

Re: Toolchest?

roger lance

Tom....I agree about the size of the project.....but I was less interested in what he made and more interested in how he made it.

Re: A Cabinetmaker's Toolchest....

#9

Re: A Cabinetmaker's Toolchest....

roger lance

Chuck....I noticed he certainly had numerous LV tools.....but also LN, Bad Axe, and maybe a Rob Cosman item or two.....and in the background, you could occasionally catch a glimpse of a number of moulding planes and other tools.

Re: A Cabinetmaker's Toolchest....

#10

Re: A Cabinetmaker's Toolchest....

charlie belden

Outstanding demonstration of the handtools, their use and a very methodical way of working with them. The videography is also very good, the music pleasant and repetative - appropriate for hand tool work.

There are a lot of handtool techniques shown in the videos - some obvious and some very subtle - yet very important. It's the subtle ones that are easy to overlook.

The long armed marking gauge appears to have a single bevel wheel, it's flat face towards the "fence". It's much easier to accurately "register" a chisel to a vertical wall rather than a slanting wall. His marking knife is also Single Bevel, for the same reason - and thats critical when scribing lines for dovetails.

| / as opposed to \ /

|/ \/

He uses a good square to check that his parts have square corners and square to the face and back edges. And he checks for Straight with a wooden straight edge - that I suspect he checks for straightness periodically. He also checks for twists with two wooden straight edges.

Stock prep is usually glossed over or not even mentioned. BUT - you can't make rectangular furniture, or boxes, out of trapezoidal parts - or twisted rectangles. If the faces aren't parallel, edges straight and square to the top and bottom faces, ends not square to the sides and top - anything you do after that is probably not going to come out very well.

Excellent series of videos.

Thanks for providing the info to get to them on YouTube