Measured success with circular plane
Joe shelton
Some of you will remember my bleatings recently over a recalcitrant Stanley #20. Doug Trembath even offered to rescue me with a replacement (thanks again, Doug). Before I threw up my hands and had a hernia repair, I'd found a clumsy workaround that clamped a thick iron bevel up (no, not the one Bill Houghton had specially fabbed in Canada). This was a crude but workable way to avoid spending lots of money for a lamp with no bulb.
As I got to feeling a little better, I began to take the booger apart. I felt certain the blade was just too far forward. Correcting that involved tedious, painfully slow work to open the mouth (about 1/32") and some flat filing on the reverse of the frog, where three bosses prevented the frog from lying in the plane of the mouth's bevel.
The filing happened only a little at a time: I'd get weak, and I had to partially reassemble several times to avoid ruining it with too aggressive filing.
I now have it using all original parts, and forming and clearing a good shaving.
Can't really put anything behind the business end yet, so my tests have been in clear cedar 3/4" wide. That's not a definitive demonstration, but I'll take a cue from the President and declare victory. I've got me a circular plane!
Many of you gave me lots of ideas and motivation for this, and I thank you yet again.
Joe



