Check it out, Roubo fans *LINK*
The Great Roubo Bench Build of 2013
Check it out, Roubo fans *LINK*
Posts
Re: Check it out, Roubo fans *LINK*
#2Re: Not Rouboesque...
Tom
the real thing.
Re: Check it out, Roubo fans *LINK*
#3A BenchCrafted fan.....
roger lance
have to hand it to the people at BenchCrafted.....first, that hand tool event in Iowa.....and now, this....very impressive.....very impressive indeed.
Re: Check it out, Roubo fans *LINK*
#4Ron Brese Had A Hand In Too *LINK*
Hank Knight
Although his name wasn't in lights, Ron Brese (Brese Planes) had a major hand in this event.
Brese Plane Blog
Re: Check it out, Roubo fans *LINK*
#5Why did they...
david weaver
.. make it that large. Were there original dimensions or something demanding it be that large and heavy? Is it supposed to be that large so two joiners could work on it at the same time?
It just seems impractical, unless the build was intended soley for exhibition.
Re: Check it out, Roubo fans *LINK*
#6Re: not that..
david weaver
I wouldn't love to have the same bench in laminated wood, four or five feet shorter, an inch and a half thinner and with the same lovely vise mechanism and superb large screw on it.
I'd probably slap a QR vise on the end and fill it with dog holes, though.
It does look like a nice bench. Who keeps it?
Re: Check it out, Roubo fans *LINK*
#7Re: not that..
William Duffield
The reason for the length and rigidity of the bench was explained in a prior blog entry by Benchcrafted.
http://benchcrafted.blogspot.com/2013/07/the-forp-official-report-part-1.html
It was built for Bo Childs of Barnesville, GA, who provided the shop space, the heavy machinery and the oak for the project.
If you search through Jameel Abraham's blog archives, you should find an entry from a few months ago announcing the project and inviting participants to join in.
Jeff Miller also wrote several blog entries about the project.
http://furnituremaking.com/wordpress/?p=410
http://furnituremaking.com/wordpress/?p=405
http://furnituremaking.com/wordpress/?p=387
http://furnituremaking.com/wordpress/?p=370
http://furnituremaking.com/wordpress/?p=361
http://furnituremaking.com/wordpress/?p=356
Chris Schwarz also wrote several blog entries about the project.
http://blog.lostartpress.com/2013/07/18/french-oak-roubo-project-day-4/
http://blog.lostartpress.com/2013/07/17/french-oak-roubo-project-day-3/
http://blog.lostartpress.com/2013/07/16/french-oak-roubo-project-day-2/
http://blog.lostartpress.com/2013/07/15/french-oak-roubo-project-day-1/
http://blog.lostartpress.com/2013/07/14/french-oak-roubo-project-day-0/
http://blog.lostartpress.com/2013/07/12/the-french-oak-roubo-project-my-part/
Sorry, the last two lists of links are in reverse chronological order.
Re: Check it out, Roubo fans *LINK*
#8The big bench
raney
was Bo Childs'. He owns the facilities and runs a very high end furniture/antique/architectural ww outfit. He regularly sells handscraped french oak flooring, and it runs 14 foot lengths - the bench allows two guys to work on either side doing this scraping.
Judging from what Bo does, the quality and volume of the work, and what I saw his guys doing there: that bench will almost certainly see a ridiculous amount of work.
His place (Wyatt Childs inc.) was one of the most incredible things I've ever seen. Don Williams and I just wandered the yards every chance we got for the first few days looking at history and craftsmanship of the highest caliber. And that is what he stores outside...
Re: Check it out, Roubo fans *LINK*
#9Re: not that..
Hank Knight
David,
Bo Childs' business, Wyatt Childs, Inc., is a high end millwork business. They do high end flooring and interior woodwork for resorts and expensive homes, including a lot of hand-scraped flooring and paneling. The big bench will allow two workmen to work simultaneously, one on either side of the bench, scraping 14 foot boards. It will live in one of Bo's shops on the premises and will be a functioning workbench.
Hank
Re: Check it out, Roubo fans *LINK*
#10Re: not that..
William Duffield
Thanks to Wilbur Pan of Giant Cypress, I found blog posts by Justin Leib, another participant in the project.
http://halfblindwoodworker.blogspot.com/2013/07/forp-final-day.html
http://halfblindwoodworker.blogspot.com/2013/07/forp-day-4.html
http://halfblindwoodworker.blogspot.com/2013/07/forp-day-3.html
http://halfblindwoodworker.blogspot.com/2013/07/forp-day-two.html
http://halfblindwoodworker.blogspot.com/2013/07/forp-day-one.html
http://halfblindwoodworker.blogspot.com/2013/07/forp-prologue.html
http://halfblindwoodworker.blogspot.com/2013/07/1-week-to-go-until-forp-french-oak.html
http://halfblindwoodworker.blogspot.com/2013/07/2-weeks-to-go-until-forp-french-oak.html
http://halfblindwoodworker.blogspot.com/2013/06/3-weeks-remain-until-forp-french-oak.html
If you Google "French Oak Roubo Project", you'll find lots of other reports on the event, but so far I haven't found any more by someone who actually participated.
Re: Check it out, Roubo fans *LINK*
#11Re: The big bench
david weaver
Thanks for the clarification, raney, et. al.
After looking over the martin equipment at IWF a couple of years ago, any time I see something big and new like that martin jointer, I have to figure it's either in a money making shop ( in this case ) or in a surgeon's shop, solely because a surgeon can afford to have a jointer like that.
(and for anyone who has bought flooring lately and seen all of the machine done hand scraped flooring) I didn't even know that anyone still did hand scraping...well, by hand.
Re: Check it out, Roubo fans *LINK*
#12Re: The big bench
Tom
I thought it was the original size just off the top of my head. Because the original use was similar to what this one is doing. For the most part, I don't believe this bench style is practical, and has just become a mass obsession. That said, 90% of any bench is the bench. The vise on these things has to be good for something, though not likely to be good for most things, while my Tucker vise is the single best things I have. However, those kinds of vises would be about as useful on a pedastal, so the bench can do without them, back to something fairly simple. As has been argues here, the tail vise while a great thing, is probably used the least in a set-up where all parts have equal access.
So at the end of the day, the Roubo bench is not practical, but it is a nice looking bench, and I have wanted one since I got Landi's book decades ago. So far my property has not given over the large enough piece of wood. But a sad number of oaks are now tumbling, so any day, one supposes.
So what is practical since I threw that around in the para one? Basically if this were an olympic sport, what would benches looks like. They would from this:
Roubo:
To this:
Olympic Roubo:

Re: Check it out, Roubo fans *LINK*
#13Re: Check it out, Roubo fans
Darren Brewster
Very cool! Must have been a great experience, with a pretty sweet bench at the end of it.
Re: Check it out, Roubo fans *LINK*
#14Re: Video
William Duffield
Jameel Abraham has posted a video of the event at the Benchcrafted blog.
http://benchcrafted.blogspot.com/2013/07/video-french-oak-roubo-project.html
Re: Check it out, Roubo fans *LINK*
#15Yet another talent revealed....
roger lance
that's a wonderful video to watch.....and the video was shoot by Jameel Abraham and Ron Brese....impressive camera work and editing.....talent upon talent.



