New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Not Your Typical Project *LINK*

Posts

Not Your Typical Project *LINK*

#1

Michael Donaldson

Not Your Typical Project *LINK*

Michael Donaldson

So in my professional life, I work as the Environmental Health and Safety Manager for a chemical company. I have recently been updating all of our safety training and am trying to move to a more hands-on approach. This week we are doing some training on fall arrest equipment and I needed a place to hang people. The problem is that all of our ceilings are 20' or higher, so in order to hand people indoors I would need an anchor point rated for 5000lbs. I needed a different solution, so yesterday, I had an idea. Fall protection is only required when the worker is over 4' off the ground, so if I made something that would keep people under that height, I would not require a rated anchor point. So I went out to our warehouse and found an old pile of 11 foot wooden beams and had an idea....I would make a full size, fully functional gallows! As long as the platform is less than four feet off the ground, it's legal. I spent all day yesterday making this, and today I had the opportunity to be the first person to test it out. The video posted below is the second hanging.

As far as design, its a basic A frame, I cut half laps for the joinery and the whole thing is screwed together (it only has to last until I can weld up a steel version). The platform is a torsion box, with a 1/2" sch 40 pipe running through all the joists and into the frame to make a hinge along the back of the platform. The front of the platform is supported by two 2x4's notched and angled so that they can only come out one way. Then I drilled through both the 2x4's and the A frame and put a lag bolt through it as a safety so the platform cannot fall accidentally. Once the safeties are removed, a quick jerk of a rope connecting the 2x4's drops the platform.

In short I got to fulfill two life dreams: First, I got paid to spend an entire day woodworking, and second, I got to build a full size gallows (What? You've never dreamed of making a gallows?)


Fall Arrest Gallows

Re: Not Your Typical Project *LINK*

#2

Michael Donaldson

Re: Not Your Typical Project

Michael Donaldson

By the way, I did cut most of the joinery by hand. I did use a circular saw to cut the plywood, though.

Re: Not Your Typical Project *LINK*

#3

Jack Guzman from Maine

Very disturbing

Jack Guzman from Maine

Michael,

It looks like you have fun at work. Nice gallows. ---Jack

Re: Not Your Typical Project *LINK*

#4

four feet???

John in NM

Wow, that number keeps shrinking, last time I read the reg it was still 6'

We try to keep everything at work as restraint systems rather than arrest systems. Makes life much simpler, and that is usually a small price to pay for the further restrictions of movement.

I also once asked our safety guy if fall arrest was the inevitable result of spring fling (I work for a university) :D -- he was not amused.

Does look like an interesting project :D

Re: Not Your Typical Project *LINK*

#5

Michael Donaldson

Re: four feet???

Michael Donaldson

4' is the legal limit for fall PROTECTION, which includes railings, etc. 6' is the limit for fall arrest systems if no railing or other engineering control is in place.

Re: Not Your Typical Project *LINK*

#7

Re: Not Your Typical Project

Bill Houghton, Sebastopol, CA

You're having way too much fun there.

Nice design, and good for people to see the equipment in actual use. Attention getting.