New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Inlay

Posts

Inlay

#1

Inlay

Derek Cohen (in Perth, Australia)

I attended a workshop this past weekend run by Brian Reid (who is based in New England). His work with inlay and marquetry is just outstanding. In particular, I came away with some ideas for adding piecing to my work.


Brian took us through the building of this piece ..





Interesting work. Delightful, funny, creative man.

Regards from Perth

Derek

Re: Inlay

#2

Re: Inlay

Tom

Nice, I used to do stained glass, and I like the abstract stuff, I almost like the before shot, there, better.

I always like Grit Laskin's work, and he is a great guy also.



Re: Inlay

#3

Re:

Tom

Lacey. Just by the by, any time the issue of exotics comes up, be sure you know what you are about. Stuff we could easily do only a few years ago is being heavily enforced today, and sale, import, export, or even interstate is way more dangerous than it once was if it touches the US.

Re: Inlay

#4

Re: Serendipitous?

William Duffield

…or maybe just coincidental?

Your photos of Brian's frame and sliding panels demonstrate his use of the "carpenter's triangle," as discussed in the prior thread, "Triangle Marking System," which, by the way, I find essential to "keep my ducks in a row."

Re: Inlay

#5

Re: Serendipitous?

Derek Cohen (in Perth, Australia)

Not by chance, William.

Brian did comment on his use of triangles. This is one of those things I just assume everyone does.

My problem has not been about using non communicative markings, but using a marking pencil that fades away into obscurity :(

Note to myself: must purchase a box of chalk ... must purchase a box of chalk ... must purchase a box of chalk ...

Regards from Perth

Derek

Re: Inlay

#6

not any old chalk

Bill Tindall, E.Tn.

At least here in US the 3/8" diameter size for "blackboard" use is too hard and does not mark easily on wood. In fact it can dent. What is needed are the 1" diameter sticks. I found it on line somewhere. Also, it is the variety used for sidewalk drawing, if you can find white. One stick lasted me decades but you may have to buy a box of a dozen.

Re: Inlay

#7

Re: not any old chalk

Steve Elliott

As Bill mentions, most blackboard chalk these days has a hard coating on the outer surface to make it "dustless." It doesn't work well for marking wood.

I tried a piece of expensive chalk from an art supply store to get around the problem only to find it had some kind of brightener that wouldn't sand out easily. My chalk markings showed up again when finish was applied. On some of the show surfaces I didn't notice the markings again until sunlight hit the surface as we were loading the delivery truck. It looked like someone had tagged the stuff with graffiti except it was in my handwriting.

Re: Inlay

#8

Re: Serendipitous?

William Duffield

I figured you probably did it on purpose, but I knew it wouldn't hurt to point out the example to our forum participants who might have missed it. I don't know what's available in Oz, but here you can get a box of 15 sticks of Crayola sidewalk chalk for $3. You get an assortment of colors, which might help if one gets easily confused about which sets of parts are legs, which are aprons, and which are stiles and rails. :D The first time I tried it, I "stole" it from my next door neighbor's granddaughter. She had left the end of a stick on my sidewalk after playing hopscotch. IKEA also carries boxes of 24 ~1/2" ø sticks, which they label MÅLA. The actual measurement is more likely to be 11 mm. or 12 mm., even though they say they conform to some ASTM standard.

If I'm marking work that has to keep its marks longer than the chalk will last, I use a Pilot gel pen, usually a P-500, because one is always available, and it sands or scrapes off with no more work than a pencil. The gel ink is very visible, and doesn't soak into the wood. Pilot also makes a 0.7 mm. P-700 which work better on rough lumber and larger scale markings, because the tips aren't as fragile as the 0.5 mm.

Re: Inlay

#9

label parts on painters tape....

roger lance

no residue issues.....what remains after removal of tape, if anything, is easily sanded away....started out using blue tape....which was improved (so they say) with green tape (frog tape)....ribbit!

Re: Inlay

#10

Re: label parts on painters tape....

William Duffield

Yep, that works, too. I use the blue tape method for marking parts when I'm disassembling and repairing old chairs. I usually mark the two parts of each joint alphabetically. I'll have to look into the green tape, because I usually also mark any damage that needs to be repaired with blue tape as well, and it would be convenient to have two different colors, one for damage and one for joint numbers. Currently, I cut the tape for the damage indicators into small triangles, and of course they don't have any letters written on them, while the joint markers are roughly rectangular.

Re: Inlay

#11

another of the good ideas

Bill Tindall, E.Tn.

...the bottom line of it, as we gain experience we label as suits our needs. I personally use numbers, triangles, chalk, crayon, pens, pencils, text, tape of various colors and probably things I don't remember depending on the need at hand. What ever makes the identification and orientation quick and reliable is employed and this need varies. Again personally, just triangles do not meet all my needs.

As amateurs we are more subject to screw ups either through more limited experience or the part time nature of our work. So more complete labeling is prudent. During the course of making the legs I used numbers, text, triangle, tape, pen, pencil and crayon. As a result of these aids the mortises, dovetails and shaping wound up in the right places.

Re: Inlay

#12

Re: I make

Tom

mistakes, but I am using my own wood, often cut by myself also, so I don't have monday morning problems, unless I started work on sunday night...