We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
We moved in a house a year ago that had an old garage sitting in the back. The previous owner was really into wood working. We have found tons of wood. Also in the find is a tool, that looks like a lathe. It has on it Pin Trimmer, and may be from Chicago(?). We are wondering if it is something worthwhile to sell as an antique, or just sell outright? I can send a pic of it if that would help.
You don't have a profile. Without a profile, you can post one picture per message from a website (people will sometimes use Photobucket or a similar picture posting service to get the picture on the Web - make sure, if you do that, to use the publicly available link to the picture). You'll find a box marked "Optional Image URL" at the bottom of the posting/reply page.
If you establish a profile, which you can do by following the instructions at the link below, you can post pictures directly from your computer, as long as they fit the 100 KB size limitations of Wood Central's software. This is often simpler for folks, although you have to follow the profile instructions very carefully (in particular, get rid of any existing Wood Central-related cookies before you start, or the process won't work).
I'm sending you an e-mail, so that, if you have trouble in establishing a profile, you can contact me.
Here's the posting page (not sure if this is the exact current layout, but it's pretty much the same) with some scrawly annotations on it. I really should do a prettier version sometime; my coworkers use to accuse me of bad handwriting, for some reason. At any rate, it shows the two places where you can insert photos: from the web at the bottom, and from your computer (once you have a profile) at the top.
Tracey Willits asked me for a little help posting a picture of the pin trimmer. This is it:
I find myself challenged; clearly, an industrial machine of some kind. Not strictly a hand tool, but this is a group with wide knowledge of historical tooling, so let's see what the knowledge base offers up.
Thanks for the compliments on the chair....it is very old, along with the table that goes with it. However, still would like to know about the tool. Sorry the ends don't look real clear, but the ends are there. We seem to think it has something to do with the making of bowling pins, a long time ago. Like I said in the description it was in an old garage and we also found parts of a bowling alley, and tons of bowling pins....which we would like to get rid of as well.
Is it the right height to hold a pin? Take it to a bowling alley and ask if someone there knows what it is. I will send the picture to someone that does the technical work at an alley ans see if they know.
According to the bowling alley folks.......It may be a tool to hold the pin while painting it. The red stripe would be painted by rotating the pin against the brush or whatever held the paint.
If you want to get rid of the bowling pins search for Bowling Pin Shoots in your area. I'm sure the club hosting the event will take them off of your hands.