New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Cutting gauge from a pig's ear.

Posts

Re: Cutting gauge from a pig's ear.

#26

Re: Or an intervention.

Tom

Roger, if you just get a Dremel, and a face shield, you will (have to) be one of the skilled ones!

An intervention Bob? What the heck are you talking about? I bought a second Inca Table Saw, jointer/planer/ and bandsaw last night. Doesn't everyone do that?

Re: Cutting gauge from a pig's ear.

#27

For what it's worth...

John in NM

I find Dremel's to be a bit underpowered. The limit of their utility for me was using the little cut off wheels, anything else and I tended to want a bigger motor. Others will certainly have differing experiences with them, all depends on what you do and with how much skill I guess.

If you can find one under $50, it would do a good job of slotting cutters as you described, though files work better for the shaping part as Bill et al point out.

Re: Cutting gauge from a pig's ear.

#28

underpowered can be essential

Bill Tindall, E.Tn.

If using a 1/16" or less end mill for cutting troughs for stringing the lesser power of the Dremel is essential to success, compared to router.

Re: Cutting gauge from a pig's ear.

#29

That would be a good use for one...

John in NM

Anything with a tiny cut area, they are great tools.

Trouble is, they are so convenient, that one tends to start using them for everything they can - which is how I burned up 4 or so over the years before getting a Foredom. Doesn't help that Dremel markets tons of bits and accessories that encourage one to exceed the capabilities of the motor :D