New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Torpedore- a completed cabinet.

Posts

Re: Torpedore- a completed cabinet.

#26

Re: Torpedore- a completed cabinet.

Mark Hennebury

Richard,

A beautiful design and great job, with many fine subtle details.

My problem is I am not really sure how i feel about the coloured tambours.

I think it, for me is one of those things that i would have to see in the flesh; to walk around it, sit down and look at it for a while and ponder what it is that i was feeling.

Maybe its just because it is so different, that it doesn't fit into my normally programmed categories; i may need to make a new place for it.

It is definitely a very striking piece and It certainly has me thinking about.

Nice to see the beginning drawings and now the finished product; it certainly would be nice to see all of the construction photos.

How were the tambours attached to each other are they glued to canvas or strung together?

Re: Torpedore- a completed cabinet.

#27

"risk"clarified

Bill Tindall, E.TN.

The risk I was considering was whether the color would stay true enough to preserve your vision of the intended color scheme. I suffer from being largely ignorant about modern furniture design so I am not going guess whether the design is risky. It certainly doesn't tip the scales to weird or strange, the thought that comes to mind when viewing pictures of much "Studio Furniture" art projects. Given your engineering skills I doubt there is any risk in construction details.

I have had some color disasters resulting from long term color changes in dyes and finish. When you own much of what was made over a lifetime one gets to see the changes that take place. Ash has been a huge problem for me. I did a commercial job some years ago and finished it with nitrocellulose lacquer. After a couple of years behind a showroom window it went from lovely "white" ash to sickly "yellow" ash. My kitchen cabinets, finished with an "alkyl" "water white"rather than "aromatic" "yellowing" conversion varnish have turned yellow-brown over the years and now nearly match the faded unstained walnut of some lacquered speaker cabinets. A rift cut white oak table similarly went yellow-brown in spite of a finish of acrylic water based finish that was supposed to stay "water white". ETC.

There are some finishes out there that stay "white" but they are not readily available. I have seen "factory" maple kitchen cabinets that stayed "white". If you found a finish that stayed white I would be interested in knowing its details.

For our darker woods the furniture with its finish is going to stay largely the same color. If shape and grain are attractive to begin with, likely changes in color of the stain or finish are not going to make it become unattractive. Hence no color risk, or at least very little risk.

Dyes- The wood dyes that are in the "premetallized" category are indeed exceptionally light fast, more so than the wood color in the cases I have tested. One can usually determine from the MSDS sheet if a dye is in this class. The other common classes (azo and anthraquinone) are less stable.

Re: Torpedore- a completed cabinet.

#28

Re: Torpedore- a completed cabinet.

Bruce McCrory

My apologies Sgian. It was a flippant remark. My brain associates certain styles or looks with Krenov. And, yes, because they are public property (Library) I refrained from tossing his books when the first was opened.

Artists, and craftsmen, tend to bleed an idea, style, or form to death, then run to another. I think they call it 'series.' 'Torpedore' had the effect of a solid punch to the brain synapses. It says: "I am new, I am fresh, Look at me; more closely!"

Re: Torpedore- a completed cabinet.

#29

Re: Marmite

Bruce McCrory


Re: Torpedore- a completed cabinet.

#30

Re: Torpedore- a completed cabinet.

Sgian Dubh

Mark, the tambour is of the glued cloth on the back type with a screwed wooden locking bead behind the finger pulls. That type is assembled in an assembly board that's dead square with two beads fixed to two edges of the assembly board. The staves of the tambour are jammed into the corner formed, outside face down, and cramped in place so it too is square. Then the canvas is attached to the back, in this case with PVA glue, which was cured with heat from an iron.

As to the look that you're trying to get used to because of the colour, only time will tell if you really like it. Slainte.

Re: Torpedore- a completed cabinet.

#31

Re: "risk"clarified

Sgian Dubh

Bill, I think the colours will remain true enough for my lifetime. After I'm dead and gone I don't think it will matter much, but if I assume vainly that the cabinet might survive for a couple of hundred years, then I'll be happy for whoever owns it to still enjoy it, whatever shape, or colour, it's in, ha, ha. Slainte.

Re: Torpedore- a completed cabinet.

#32

Re: Torpedore- a completed cabinet.

Sgian Dubh

No problem Bruce-- I get the impression you too are not Krenov's greatest slavering disciple. Personally, to be honest, I can't stand to read the banal, tree hugging, drippy hippy infused drivel of his books, although I'm jealous of the fact he was able to generate a continent wide fan club from such uninspiring maunderings.

Regarding the design of Torpedore, I don't set out to be 'out there' when I'm coming up with ideas, nor do I try to be different just for the sake of being different-- wacky for the sake of wacky, if you like. I was drawing, I suppose, on some traditional forms, adding forms of my own a bit, but popping in a twist with the colour, and yes, there's also a nod to incorporating well founded traditional construction -- M&T's, edged joints and dovetails of various types all work as well now as they've ever done. Slainte.

Re: Torpedore- a completed cabinet.

#33

More on the process please.

Mark Hennebury

Richard,

Projects that are a little different in scope and style often require some pretty interesting operations to produce, so I would really like to see as much of the details of how it was made.

I would love to see tools, machines, setups, jigs and operations; so if you find the time to post a few photos and descriptions that would be great.

I always found that the process of building a new piece had, by the time i was finished it, inspired me to want to get started on the next one.....just wondering whats next on your list.

Mark

Re: Torpedore- a completed cabinet.

#34

It's a delight ......

Bill Tindall, E.TN.

.......to have you two participating. Seeing good work is inspiring to make new kinds of furniture(mitered corners for example or sculptured legs) and advance one's skills.

One of the things I regretted about Home Furniture magazine is that there were not more descriptions of how some of the novel furniture elements were accomplished.

You two are good teachers and I have already learned much from your posts. More!! please. Can't wait for the book.

Ellis, do you have any publishing contacts?

Re: Torpedore- a completed cabinet.

#35

Thanks...again Bill

Mark Hennebury

It is very nice of you to say, and to include me with such good company as Richard.

A nice word from you has made my day on several occasions. Thanks.

Curiosity is the driving force for many of us, and today with all of the modern technology we have the opportunity to look over the makers shoulder and see the entire process unfold.

Seeing a finished product such as this fine cabinet made by Richard is just a tease for me and i would like to see all the details of making it, that's really the thing that fascinates and engages me.

The finished piece is just the end of a long journey, the last page of a book. The value to me is in seeing the full story; the tools, jigs, decision making etc.

Mark

Re: Torpedore- a completed cabinet.

#36

Re: Torpedore- a completed cabinet.

Robin Corell in Atascadero,CA

Having spent a month in New Zealand and mistaking the jar of marmite for apple butter which I love I completely understand that analogy. Actually most of my work has that same "marmite" quality.

In my sculpture and 3d design classes I always require the use of color. I like the way you used color on this piece, particularly that the color is translucent and that the "woodness" still reads through the color. I might have liked to see a subtle wash of color on the end panels but I would be at a loss to suggest what hue or tone.

Robin