New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Bill Rittners knob and tote sets

Posts

Bill Rittners knob and tote sets

#1

Bill Rittners knob and tote sets

Joe shelton

Never fond of the 'Buck Rodgers' look of LV planes, I nevertheless was schooled, at Lonnie Bird's near insistence, in the excellent performance of the BU smoother. Equipped with two irons of low- and high-angle bevels, the rather massive plane solved most of my neophyte problems with wood vagaries, and I thoroughly understood Lonnie's approach. But the damn thing still looked like hell, and despite my respect for it, I did not look fondly at it, nor reach for it unless I had a difficult patch.

Until I stumbled across Bill Rittner at Hardware City Tools, and his handles for planes (and for old crotchets). The BU smoother now sports walnut handles, looks great, feels terrific and suits me fine.

Thanks, Bill.

Joe

Re: Bill Rittners knob and tote sets

#2

Re: Bill Rittners knob and tote sets

Tony Zaffuto

How about a before and after picture? I might be interested in some "bling" for my LV!

Re: Bill Rittners knob and tote sets

#3

Re: Bill Rittners knob and tote sets

Derek Cohen (in Perth, Australia)

Hi Tony

The upright LV handles really do suit a higher bench. I went back-and-forth on the originals and my own customs, returning each time to the originals.

I changed the handles again when I completed the current bench a year ago. This is 2" lower than the old one. And so I swapped out the handles again!

Here is the LA Jack and the BU Jointer with Bill's handles. Alongside is a LN #3 for comparison ...


Excellent handles. First time fit.

Regards from Perth

Derek

Re: Bill Rittners knob and tote sets

#4

Are they any thicker than LN totes?

Curt Putnam

The tote on my LN #4 just wiggles around in my hand whereas the LV originals fit like a dream. So I'm looking for something for a bigger hand. TIA, Curt

Re: Bill Rittners knob and tote sets

#5

Re: Are they any thicker than LN totes?

Joe shelton

Yes, and Bill makes this a distinct point. His site will cover it better than I, and I certainly vouch for the quality of his work. Still, if the LV tote fits you well, just disregard my carping and enjoy your plane. It is a fine tool.

Joe

Re: Bill Rittners knob and tote sets

#6

Re: Bill Rittners knob and tote sets

Jerry Nicholson

I just looked at that web site and I am impressed! Though I don't understand how he can sell them for $45 after spending two hours with a rasp. Kind of like the way I charge friends for computer work, I guess.

Jerry

Re: Bill Rittners knob and tote sets

#7

Consider yourself lucky...

Denis Chenard in Ottawa

My "friends" expect me to do the work for free >(

DC

Re: Bill Rittners knob and tote sets

#8

Re: Consider yourself lucky...

Jerry Nicholson

I did charge a friend for considerable computer work I had done for her. Normally, I just say "don't worry about it" and occasionally my wife and I get a free dinner but she kept insisting so I finally asked her if $75 seemed reasonable. She said yes and paid me the $75. She never asked me to do any computer work again! Actually, I don't have very many computer customers any more. Most of them were elderly and several have died.

A few years the teenage girl next door came over and asked me if I could help her get her laptop connected to their wireless server (I had helped her dad a few days earlier). I quickly solved her problem and some days later her folks were thanking me for helping her. I told them I thought it was great that a 70+ year old could help a teenager with a computer problem.

Jerry