What are you working on? May edition
What are you working on? May edition
Posts
Re: What are you working on? May edition
#2Re: What are you working on? May edition
david weaver
finishing a porch converted to a room (the bits that the contractor didn't do because I felt I could do them instead of paying for them), and working on kitchen cabinets. Nothing exciting, unfortunately.
Re: What are you working on? May edition
#3Re: What are you working on? May edition
Ron in Sterling, CT
Just got back to CT after our winter in AZ. Getting ready to start my 4th blanket chest (this one for Grandaughter #3), right after I get caught up on the yard work.
Ron
Re: What are you working on? May edition
#4Re: Way Too Many Irons in the Fire!
William Duffield
The masons showed up. We weren't expecting them for a few more months. I'm helping them replace a chimney. It's a historic house, in a historic district, so we can't do the easy thing and put the new chimney on the outside of the house. "While we're at it," we're putting in a fire place to replace the one someone tore out a century or two ago. I've been drawing up plans, hauling out coal, bricks, rubble and construction debris, and in general helping the plumbers, electricians, carpenters and masons. All the utilities in the cellar had to be adjusted or moved, including an oil fired water heater and vents for the furnace (also oil fired, and with plumbing to the radiators), electric, AC ductwork, water softener, phone and ethernet. When they're done with construction, I get to design, build and install a colonial style mantle and fireplace surround, which needs to please the historical society and not look out of place in a house built in 1727. Oh, and I'll have to reinstall a wall of closets that I removed in the bedroom above the fireplace so the masons could get at the chimney. I expect the new chimney will be larger than the old one, so "reinstall" is probably an understatement. We'll see what the pine board floor in the dining room looks like when they are done, but it will at least need to be refinished.
I'm finally getting around to making the drop leaf top for a mahogany Queen Anne breakfast table that I've been putting off for several years. I've cut and fitted the rule joints and installed the hinges, and I'm now working on the edge treatments. The edge is scalloped, with a thumbnail moulding. The rough work is being done with a bandsaw and router, but it still requires a lot of finish carving and shaping by hand. When I get back from Wyoming, I'll French polish it.
Also, this week, I'm preparing for a road trip to Yellowstone. I'm taking the shop dog with me, so I'm building a barrier to keep her out of the front seats and to keep her nose out of my face. At seven stone, that is essential, especially since she thinks she's still a lap puppy. It has to be removable, so I can use the back seats, and also so I can carry 8' boards when I'm not carrying the dog. It is a wood latticework, with lots of M&T joints, so I won't be doing them by hand. I wouldn't have attempted it if I didn't have a Festool Domino.
Also, I'm building a reading lamp for my wife to hang beside the bed. The table lamp on the bedside doesn't put light where she needs it. It will be similar to my favorite articulated shop work light. The principal construction steps include making a wall bracket, turning the head, disassembling, rewiring and reassembling parts from two IKEA light fixtures, and turning a base to hold the arm in a socket, and allow it to rotate.
I had to put my copy of the Chester County Bible Box on hold (group build being followed by Logan Cabinet Shoppe and Giant Cypress) due to several unexpected contingencies, but it's also sitting on my bench in pieces. The need to reschedule its construction has been a serious disappointment.
Re: What are you working on? May edition
#5Re: ??? We know you've been up to something!
William Duffield
Fine scholarship, superb execution, and, even if you deny any talent in that area, a very artistic display of your craftsmanship.
Re: What are you working on? May edition
#6to painful to talk about
Bill Tindall, E.TN.
Designing these desk legs and the rest of it all. Drawing, making models, etc. is not near as enjoyable as making real furniture most likely because I am not very good at it and am constantly reminded of this fact. It just seems like annoying delay to getting on with building something.
I started with a picture of a desk. In retrospect it has a multitude of design elements so it looks cool and I would like to try my hand at them- complicated inlay, shaping, veneering, joinery, etc. The student that made this desk in the picture pulled out all the stops to add design features. The more I draw (my bench and a drywall square has become a drafting board) the more I realize that these embellishments are adding complexity well beyond what makes any sense, for example the "cloud lift" skirt. In this next iteration I am going to try something simply orthogonal with some of my own embellishments like blackwood cockbead on the rift cut ash drawers and a blackwood string border on a curly rift ash top. But I am still stuck with needing some attractive legs on it. I need to go look at some legs- maybe the mall Friday night..........
I did smoke an awesome pork shoulder that we had with Rick Bayless BBQ beans and slaw followed by a PA rootbeer floats.
Re: What are you working on? May edition
#7this:
Bruce, a MN Galoot
Re: What are you working on? May edition
#8Re: Way Too Many Irons in the Fire!
Bruce, a MN Galoot
If your trip to Yellowstone brings you anywhere close to Minneapolis, let me know.
Re: What are you working on? May edition
#9Re: Way Too Many Irons in the Fire!
William Duffield
Google Maps sends me to the vicinity of Minneapolis either on the way out (and then on to Fargo) or on the way back, depending on the weather, and now also depending on your schedule. We'd be more than honored to pay you a visit.
Re: What are you working on? May edition
#10
Islands and Perches
Jack Guzman from Maine
I just finished an island for my wife.She really needed the counter space.Got a nice piece of butcher block from the local salvage guy and made a base out of some local red oak I had on hand.
I've been looking at Peter Galbert's Chair Notes and noticed a pretty interesting stool that he calls the Perch.Thinking that would be just the thing for LOMLs island I made one. He supplies videos and drawings to make it real easy. So I'm in the process of finishing that. My sister visited and I already have an order for another one.
Tomorrow we're going to see how many early yard sales are about.---Jack
Re: What are you working on? May edition
#11Your problem Bill is your smoking the wrong stuff
Mark Hennebury
Creative juices wont flow when you try to hard; you have to relax, chill, float and flow; root beer ain't gonna cut it!
Its a Zen like thing: you have to concentrate on not concentrating, letting your mind be free,to see what emerges.
You cant force these things, you have to let them arrive.
Re: What are you working on? May edition
#12Ya Bill, get a lava lamp, a black light....
roger lance
sorta drop out and tune in....become one with nature....put a flower in your hair....protest the war.....spend the day in a sweat lodge....soon you'll have a vision of the right leg shape....peace out.
Re: What are you working on? May edition
#13to be honest thats about it
Mark Hennebury
Design... well good design, in my opinion is not about "what you want" not about putting a bunch or random " nice elements" together, in fact is has little to do with you at all.
You should be the listener not the speaker.
You need to be a quiet and attentive observer, you should be aware of the intended use of the piece that you are making and the materials that you are using, are they suited? is this a heavy or light piece, whats going in it or on it, is the wood coarse grained or fine grained? Is the wood color bright and loud or subtle and delicate, Is it a utilitarian or display piece. A outrageous brute monster truck or subtle lines fine Aston Martin?
These things will dictate design, you don't have to stick a bunch of elements together and sweat over whether or not they look right. if you look with a quite and clear mind you will see what is required...and it will be based on the materials, engineering, the intended use and objective.
And you would be the facilitator that made it happen, a part of the whole,
not the manipulator trying desperately to control everything.
Time to get out and re-read the "Fountainhead" and "Zen in the art of archery"
Re: What are you working on? May edition
#14Well, that explains my shortcomings
Re: What are you working on? May edition
#15
Nothing! *PICS*
craigd
yet anyway. I'm in that existential wasteland of what I'd like to do vs what I want to do. Or, after reading Mark's post, I'm in free association mode, letting my mind wander and hoping it sticks to something that doesn't stick to my shoe.
But! I did finish the plane I posted last month. It became more involved than I had anticipated but worked out quite well. More metal work than wood work though, which is kinda funny as it is a mostly wooden plane.


and the exploded view:
Re: What are you working on? May edition
#16
Nice!
Jack Guzman from Maine
Craig,
That is the prettiest transitional I've ever seen. Do you have more details on the build process?
I was doing some home repairs in a farmhouse for a friend whose grandfather was a woodworker and came upon a transitional smoother that was still set up for daily use on his workbench(he's been dead many years). I used it to fine tune some part of what I was working on and was impressed.It was sharp and felt good in my hand.It performed beautifully. After that I had a new respect for these planes.---Jack
Re: What are you working on? May edition
#17Just started
Patrick Gibbons
I'm making a portable tool chest with a clever design (not my own). If it works out I'm going to make a few more for my nephews. I'll post pictures later.
Re: What are you working on? May edition
#18
Re: Nice! *LINK*
craigd
Thanks!
I wrote up the build, the link is at the bottom.
Basically, I bought an old, clapped out transitional because I liked the look and, after sitting on the shelf for while, decided to see if I could make it into something really functional (which it wasn't as it had major checks, blown out mouth, just used up). One thing lead to another and it became less of a woodie and more of a composite (brass and epoxy).
Personally, I think transitionals have some design issues but if well adjusted and used on wood that behaves, they should work fine.
http://zkprojectnotebook.wordpress.com/2013/04/10/brass-bronze-and-steel/
Re: What are you working on? May edition
#19I'm not only remodeller. Yippiee!
Bruce McCrory
After 4 months of hara-kiri (sp), I took a two week vacation. Actually, I didn't have the gnarlies to teach myself sweat soldering. That's a fib. Really, I was afraid of flooding about $20k of water damage repairs and remodel that started January 6 when my wife was taking a shower. Today, I set the new shower pan. Yesterday, the plumber fixed the shower that caused the flood.
This has been an interesting, if not frustrating, project.
My biggest discovery was realizing that cardboard boxes do not make very good tool boxes. I work downstairs, I work in the garage, I work upstairs, I work in the driveway. Moving tools is a 4-trip operation. And, I can't stand up for very long, either.
I have been designing a portable tool carry-all, and stool. They will probably be done after the repairs and remodel are complete
Re: What are you working on? May edition
#20A noble spirit
Mark Hennebury
Having visited the invisible world of infinite possibilities,
Sought out and gathered up the essence of what could be,
Given form to the formless in this world of the mundane,
You sir, have elevated us all… to a higher plane.
And i thank you.
Nice work!
Re: What are you working on? May edition
#21Re: Well, that explains my shortcomings
TomD
Based on semi-long observations, short comings are just juice for your to-do list. This time next year you will be somewhere way further down the line. The great thing about stuff that has a mindset component is that you can make the change instantly when it makes sense to you to do so. World's longest undefended boarder to drones everywhere. An inflection point.
Re: What are you working on? May edition
#22nice plane, dangerous blog
Lars Parrington
i read through your posts on making the plane, and then checked out a couple others. i'm hooked. i can tell i'm going to be wasting a lot of time this week reading through your archives.
Re: What are you working on? May edition
#23
The first entry is free
Re: What are you working on? May edition
#24Me too, frustrating
Re: What are you working on? May edition
#25I have to say...
John in NM
Everything you post just impresses the hell out of me
Good job once again!



