Rebirth of wooden jointer planes
Bill Tindall, E.TN.
The invention of electricity doomed the wooden jointer. With the development of the electron driven jointer came the discovery that it could be used to flatten boards before panel assembly, thereby providing an opportunity to repurpose the numerous retired wooden jointers.

Tuning the jointer. Much of the tuning is the same as we are accustomed to. The blade is sharpened and dust removed from the body. Thankfully, the inevitable pits and rust from Ebay Brand planes do not have to be removed, and the use of historically correct abrasive is not required for this application. Finally the blade is set for the desired projection as shown in the picture with the cap iron set well back to eliminate the “Cap Iron Effect”.

The second picture shows the wooden jointer employed, not for the obsolete task of edging, but the more important task of flattening panel lumber.

It is expected that this development will spur the discovery of other uses for wooden planes, for example with the blade removed to be used as sanding blocks with sticky abrasive or mounted upside down to be used as a bench dog.
It is recommended that several be horded before prices increase.



