New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Installing drawer slips

Posts

Re: Installing drawer slips

#26

A further thought ..

Derek Cohen (in Perth, Australia)

In my feeble attempt to visualise the construction, in my head I see a T&G construction being the easiest way to join the slip to the base so that it is flush with one another. Indeed, one of the reasons I purchased the smaller LN T&G plane a couple of years ago was in discussion with Neil, who suggested this plane for this very purpose.

Regards from Perth

Derek

Re: Installing drawer slips

#27

Potenitally a tedious fitting job

Bill Tindall, E.TN.

If we are talking about the construction I was directed to there is a challenge to meet. The joint will be staring you in the face like a crack in a floor board, and waiting to collect stuff like a crack in a floor board. Rather than just worrying about the bottom merely sliding into its groove now one also has to worry about getting these rabbits to meet nicely and not leave unsightly gaps.

Furthermore, the drawer bottom is not constrained. It it chooses to buckle up there is nothing to prevent it other than the weight of the socks.

During my last foray into English drawer study I saw this problem handled with easier joinery. A very shallow groove was cut into the drawer side, with the slip below.

But, for those that like a challenge it will be an opportunity.

Re: Installing drawer slips

#28

Re: I agree

Patrick Gibbons

I believe the Colonists used eastern white pine for drawers. This wood is light and stable and thus can be thicker and not add extra weight over using oak in thinner demensions. Now, is this really true? I seem to remember an Antiques Roadshow with a Colonial piece from South Carolina that had yellow pine drawers, decidedly heavier than white pine. I would guess that English tradition made thin sides to reduce weight. Is this really the case? Do we always find English pieces using slips? Making a slip by hand is pretty easy. It can be split from a billet rather than sawn. It can be slit also. Long story short, what was really standard practice? I like using slips because it precludes misalignment of grooves in sides and fronts. That to me is a time saver. I like Bill's method of fabrication. It's fast and straight forward. One can cut drawer sides wide enough to plow a groove in the side, cut that off and use as a slip on the piece it was cut from. Or groove the edge of a thick board and then cut that edge off to use as a slip. Either way is relatively fast. Last time I applied glue to the slips and placed on the sides and then immediately slid the bottom into the grooves and nailed it to the back. I was in a hurry. The bottom kept the slips in place and acted like a wedge clamping them in place.

Re: Installing drawer slips

#29

Drawer wood

Bill Tindall, E.TN.

I was lucky to have a tour of drawer construction at the Philadelphia museum a few years ago. I saw drawer sides built from yellow pine, white and red cedar and poplar. The white cedar has a curious history. For a time white cedar was imported for shingles. These pieces could be readily reduced to drawer sides.

Yellow(long leaf) pine is the most common secondary wood from Virginia south. Poplar was common to the north. White pine makes a dandy drawer bottom but I consider it too soft for sides. Don't know if it was used in Boston.

Re: Installing drawer slips

#30

More info, please

Wiley Horne--So. Calif.

"During my last foray into English drawer study I saw this problem handled with easier joinery. A very shallow groove was cut into the drawer side, with the slip below."

_______

Bill, I have independently been thinking about this same approach--maybe about a 1/8" groove in a 5/16" drawer side, with a slip below for extra support. Where did you see this used in the wild? I'm curious.

Wiley

Re: Installing drawer slips

#31

Mecca for English furniture

Bill Tindall, E.TN.

There is a shop in Shelbyville KY that has many rooms of English furniture. The owner goes to England several times a year, buys up a container sized lot of furniture and ships it to the shop. (do the English know their heritage is being depleted?) Additionally, they have a shop(s?) that are making reproductions of high quality for the shop. They are nice people and have never minded me poking about the store examining how stuff is built. The age of the pieces range from late 1600's to recent with most in the mid to late 1800's. I hope to be back there Sat if there is something you would like to have investigated.

Re: Installing drawer slips

#32

Trip to Shelbyville

Wiley Horne--So. Calif.

Hi Bill,

Thanks for the offer to investigate! What I'm interested in--and no doubt everyone else here is, as well--are your impressions of joinery detail as you make your own explorations.

For example, if we focus on drawers for a moment....Is there an 'English method', or are there 10 or 100 English methods, depending on time period when made, and regional/local variation? Are there characteristic details, which you would always spot as English, such as thin, hardwood drawer sides and use of slips rather than grooves in sides? And specific methods of affixing the bottom.

What you describe is a unique resource, and one which might not be available to very many folks in the UK itself--they too might be interested to hear of what you are seeing!

Have a good trip!

Wiley

Re: Installing drawer slips

#33

A tall order

Bill Tindall, E.TN.

I have visited this shop a dozen times and looked at scores of drawers (daughter lives in this town and I can escape my granddaughters at the shop). A report on what I have learned would be a lot of typing. I'm not interested in antique history. My visits are more focused on what has held up and still works after 100-300 years.

Brief summary- Side play of a heavy 1/32" seems ideal. I have only ever seen one plump dovetail at the store. It was in a 1600's all oak piece. Almost everything else is mahogany front, quartered white oak sides, some of astonishing thinness, and very small dovetails. For reasons I can not fathom I see plentiful bottoms with the grain oriented "wrong" and they are invariably split. Bottoms seem to be typically pine of some kind.

Slips can be as simple as strips of wood glued to the drawer bottom. Sometimes the bottom is rabbited into the side and the slip attached to the drawer bottom. When a slip fails the oak drawer side mills an ugly groove into the divider. Slips that are nailed on do substantial damage when wear exposes the nails (what were they thinking!).

The main thing I have learned is that side clearance on a drawer of about 3/64 makes for a nice fit and that slips enable a lighter drawer to be made that slides effortlessly when waxed. I have never seen anything in the store that I wanted to make, though a small desk came close.

Re: Installing drawer slips

#34

No more than otherwise

James Watriss

I imagine that, back in the day, the slip making and bottom fitting were done with a pair of planes that were more or less like match planes, to form a matching T/G joint. So really, it wouldn't be much worse than fitting the drawer bottom to non-flush slips.

That's how I would do it, anyway...

Re: Installing drawer slips

#35

fitting no different.......

Bill Tindall, E.TN.

But it is two more sticks of wood to size and S4S. Trivial today with a planer and table saw. Not so much with hand tools.

Re: Installing drawer slips

#36

Re: fitting no different.......

James Watriss

If the planes are properly designed, bottom thickness would have room for error, so more like s2, then profile ends to fit. Fitting by hand, either method is roughly equivalent.

By machine, of course, it would be different.