We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I am a little embarrassed to say that I bought this back in the power tool days because it looked cool. ( 20 years ago) It is a reproduction of some historic tool. That was in the days when I had 5 routers and a bazillion bits. The beader was stored away in the velvet bag it was mailed in. When setting up my new shop, I came across it, and today I tried it out preparatory to making some clocks as part of my work for Paul Sellers's on-line hand tool school. I can't believe the quality of this thing. Beautiful wood. Nice fit and finish. The cutters are at least twice as beefy as any
other thing like this that I have had my
hands on. I cut a gorgeous bead on cherry
end grain, and cutting with the grain is a dream. Anybody know what the original was?
Ron........... who started a journal/ sketchbook for the shop today
It is based on the Windsor beading tool - can't remember which model; there were several. Originals are pretty expensive, but as I recall this one wasn't cheap. I got a bunch of off-cuts from Ron Hock so I can make my own cutter shapes, but I can only remember actually doing that once. It is one of those tools that is really nice to look at, works very well, but is a little too fiddly to set up to see service very often.
As you know, I made a beading tool (shown below) and am looking for metal stock to make the cutters.....so far, I'm looking at scratch stock replacement blades by Ron Hock that are 0.05" thick which is about half of your 7/64" or 0.109" thick....the Hock stock is thicker than using a scraper blade....will have to look at what's available at McMaster-Carr for thicker material. Thanks for the info.
Ron.....I've got 4 of those replacement blades for his scratch stock and for now, I'll work with that....maybe I'll give him a call and get his opinion.....he might just sell the thicker marking knife stock at 3/4" width without having to put a knife edge on it which I would be cutting off....who knows, we'll see.