New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Scratching tulips

Posts

Re: Scratching tulips

#26

PS

Bill Tindall, E.TN.

The brass bolt that sticks down requires that the piece to be scratched is elevated to get this bolt up high enough to not drag on the bench. I replaced the protruding bolt with a set screw, thereby gaining more than 1/2" of clearance.

I really dislike this tool and wish I had just made one.

Re: Scratching tulips

#27

Keeping your profile name, or fixing it

Bill Houghton, Sebastopol, CA

Sir William Duffield's right: you've changed the name under which you're posting, so Wood Central doesn't know who you are. Fixing it's fairly easy. There are two ways to reset things so Wood Central's software recognizes you as someone with a profile and thus full posting privileges.

Method 1: from any of the message boards, find the “Set Preferences” link at the top of the page (in a box of links). Open this, enter your profile name in the “Personal Information” box, enter your password if you need to do so (you can save the password, but sometimes you have to enter it again anyway), and save.

Method 2:

1. Go to post a message, either a new one or a reply.

2. Enter your profile name (as above) in the "Your Name" box on the message page.

3. Enter your password (unless you're previously instructed Wood Central to save your password for your profile).

4. Hit the "Preview" button at the bottom. Wood Central and your computer will then trade cookies, and WC will recognize you by your profile name. You don't have to complete the posting process; "preview" will trigger the cookie exchange*.

Once you've made the change, if you have your browser set to accept cookies (the default setting in most browsers), Wood Central should automatically put up your profile name when you go to post.

If you have to delete all cookies or even just Wood Central cookies for some reason, or if you accidentally change the name under which you post, you'll need to use one of these methods to regain the profile access.

----------

*Every time I type that phrase, I have this picture of a sweet little cookie party, with doilies and a tea set, and Wood Central's server and computers complimenting each other on their lemon squares and gingerbread.

Re: Scratching tulips

#28

made a chisel, sharpened a finger (ouch)

Bill Tindall, E.TN.


I found a needle file that was 1/16" thick and only had teeth on the edges. Seemed useless so I cut it up for chisels. There is a chicken and egg issue in that I need a tool to do stringing but don't know its details until I get good at doing it. The shape of what I made can be modified.

In the course of reducing the thickness by rubbing on a diamond plate using finger to press the tiny blade onto the plate I observed the grindings turn from black to pink. Turns out that pressure on the end of one's finger to press metal to grit numbs it.....temporarily.

I had previously tried making a chisel from band saw stock. This metal is too soft for a chisel. Would not hold a fine edge.

Re: Scratching tulips

#29

Re: made a chisel, sharpened a finger (ouch) *LINK*

Patrick Gibbons

P. M. Drill rod, squares and rectangles can be made into small tools. I'm playing around with heat treating now. It can be done without special equipment. There has been a learning curve for me.


http://www.flat-stock.com/~store/Merchant2/merchant.mv?Screen=CTGY&Store_Code=T&Category_Code=PM

Re: Scratching tulips

#30

Re: made a chisel, sharpened a finger (ouch)

Patrick Gibbons

The W1 rectangles are under the drill rod, watercrat squares.

Re: Scratching tulips

#31

Re: made a chisel, sharpened a finger (ouch)

TomD

I did that thirty odd years ago when I got my water stones. The finishing ones seemed so smooth, and I used my fingers on the surface to help stabilize the tools. Smart , huh? The water never went pink though.

Re: Scratching tulips

#32

Re: PS

Patrick Gibbons

Of course having this one has given you instruction on how to make one better.

Re: Scratching tulips

#33

Re: PS

jack curtis

And this illustrates a major advantage to apprenticeship: one starts out in a shop surrounded by professional tools to use, and proceeds to make one's own set, complete with any modifications. We, OTOH, have to buy piles of stuff just to see how it's made, we're all on our own outside of small groups.