We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I saw this over on Bob Easton's blog. It will hang on a French cleat on the wall behind my bench. Dados with a chisel and Miller Falls router. This one took 90 minutes. Others will be faster. I need to make a few more for my chisels and carving tools. I think I will make one for rasps and files also. Simple directions and caveats are at Bob Easton's blog archive
Ron....its good to get organized, is it not ?.....like the use of french cleats in storage.....I've a psychological worry about storing sharp tools pointy side up: I see myself coming down on a blade as I reach for a tool....probably just me.
My experience: if they're pointy end up, allow nothing above them to reach for. If they're pointy end down, allow nothing below them to reach for. Why? Over time, one gets in a comfort zone--little tiny nicks then follow. YMMV.
My whole shop is encircled with French cleats, that I cut with my hand plane. I have racks, cupboards, and wood storage weighing hundreds of pounds, hanging from them. It started as a method for hanging racks that I thought I was copying from Carl Swenson, though I later saw a better picture of his shop, and I don't think he had cleats.
It is great because one can move the racks to different areas, and one can take the racks to seminars and hang them from Krenov style horses.
I have a couple of racks of chisels that are closely stacked, and sharrrp. The chisels can be removed almost effortlessly, but the "almost" part has lost me some skin over the years.
Those are clips for the international game of croquet. I got interested in Croquet when recovering from an accident, and there was a 3 wicket version played in NZ that I thought the kids would like, plus my dad liked it, and I like putting. I made my own international wickets, posts, and mallets. The balls I bought, they are like 5 pin bowling balls, or double size billiard balls. However, the anticipated participants did not show the hoped for interest...
Though the ones I did are designed to work in the doors of a wall hanging tool cabinet, they would probably work in a drawer with a minor modification. I made them so that I could take the rack out and take them ALL to the workbench. Found that when I put them back in the rack when not in use, fewer roll off the bench - and onto the cement floor,