New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

The measure of a devoted wife

Posts

The measure of a devoted wife

#1

The measure of a devoted wife

Bill Tindall, E.Tn.

We are making a bench for son-in law during the Christmas vacation.


My daughter volunteered to chop some of the mortises. Oak is a miserable wood to deal with but it makes a stout bench.


Gluing something this large and thick is a challenge. Joints must be perfect because this stuff is too strong to be coaxed into alignment. To my astonishment it all came together well and will require only a modest amount of final smoothing. (I did one joint at a time for things go better this way when the wood is thick and strong.

Re: The measure of a devoted wife

#2

Re: The measure of a devoted wife

TomD

Devotion is all well and good, but skill, now that is something also.

Re: The measure of a devoted wife

#3

Re: The measure of a devoted wife

Bill Houghton, Sebastopol, CA

Good that it will be a joint* present from you and your daughter/his bride. I'm sure that will make it even more meaningful for him, every time he uses it.

*OK, OK, pun not intended; but not bad, eh?

Re: The measure of a devoted wife

#4

She's certainly enjoying it and

Wiley Horne--So. Calif.

what a great plan for continuity within the family!

Wiley....thinking Bill must have a warehouse to hold his wood stash!

Re: The measure of a devoted wife

#5

Re: The measure of a devoted husband?

James Watriss

Is it me, or is she using a rubber mallet?

That's just mean... She'll be at it forever...

Re: The measure of a devoted wife

#6

Re: After 5 hrs. she's probably done now

George Allchin in Lowell, Mich.

Jeeez Bill,

She must really like you. After about 1 min. my wife would have said "This isn't working so well."

Work safe,

George

Re: The measure of a devoted wife

#7

wood stash

Bill Tindall, E.Tn.

No warehouse ,just a shed. Well, this is half of it.


Re: The measure of a devoted wife

#8

Indeed a "rubber" mallet

Bill Tindall, E.Tn.

I despise the sound of wood clunking on wood. These dense rubber, or probably urethane, are just great for bashing chisels. I have a variety of weights and indeed she is swinging the largest. They are noiseless, and essentially no rebound and they are nicely balanced.

Re: The measure of a devoted wife

#9

Re: After 5 hrs. she's probably done now

Bill Tindall, E.Tn.

Indeed she didn't so all of them. Oak is just brutal. We divided the tedium. Bashing out mortises is fun for a bit but it gets boring after a few. Daughter has worked in the shop with me since she was very young.

Re: The measure of a devoted wife

#10

Re: wood stash........WoW!!!!


Re: The measure of a devoted wife

#11

Re: Indeed a "rubber" mallet

TomD

I was sold the first time I used one of those urethane carver's mallets. Wooden mallets make a lot of noise, even compared to hammering nails. And hammering nails is above the safe limit.

Re: The measure of a devoted wife

#12

David Barnett

(Message Deleted by Poster)


Re: The measure of a devoted wife

#13

Re: Indeed a "rubber" mallet

Bruce, a MN Galoot

I was sold on the urethane mallets, too, when I tried one last summer at a timber framing school, whacking on a Barr chisel. The feel and lack of ear-splitting crack were both very nice. One of those mallets was even delivered to a Christmas tree in my house.

Re: The measure of a devoted wife

#14

Jack Guzman from Maine

Durometer

Jack Guzman from Maine

David, I thank you for introducing me to a new word. I have never heard this word before. When I saw it I thought maybe a mistype(is that a word?)but then realized you make few typing errors,or none that I can recall so I looked it up in wikipedia. Just another tool in my arsenal.---Jack

Re: The measure of a devoted wife

#15

Re: Durometer

TomD

It is a fairly common word. They sell sanding wheels on durometer, 70 being about typical for many uses.

Re: The measure of a devoted wife

#16

Re: Indeed a "rubber" mallet

North of the Border

Paul Sellers has gone at length about his mallets and he, too, uses a non-wooden mallet for doing mortises: http://paulsellers.com/2012/07/why-not-mallets-myths-busted-again/

Whatever works, works.

Happy New Year.

Re: The measure of a devoted wife

#17

Re: Indeed a "rubber" mallet

TomD

He writes as though a dragon might have eaten his pancakes as a boy.

Re: The measure of a devoted wife

#18

Re: Indeed a "rubber" mallet

jack curtis

He writes as though a dragon might have eaten his pancakes as a boy.

I don't pretend to get this, but it sure sounds funny. I use a polyurethane carver's mallet from time to time; but I can see a distant future without oil products or trees suitable for mallet making, so most of my bets are with the Japanese metal, especially for mortising.