New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

A new saw

Posts

A new saw

#1

A new saw

ron bontz

Well I mostly just lurk here but since I posted this a couple of other places I thought I would see what folks here thought.My half back is 18+" 0.032" plate. Filed 10ppi, 10 degrees rake, 10 degrees fleam, with about 10 degrees slope. Meant to be aggressive enough to rip a little as well as cross cut reasonably smooth.


img

Re: A new saw

#2

Awful purty

Ron Harper

How does it cut?

Re: A new saw

#4

Re: A new saw

Ron in Sterling, CT

That is one beautiful saw. What kind of wood is the handle made out of?

Ron

Re: A new saw

#5

Re: A new saw

roger lance

Ron....Welcome to this forum.....I mostly post here and lurk on other forums where you post.....I've long admired your beautiful work.....and this saw is no exception....the Art Deco theme is wonderfully captured here....that saw is art....please post some of your other works here as well....it will be appreciated.

Re: A new saw

#6

Jack Guzman from Maine

What he said.

Jack Guzman from Maine

Beautiful work. I'd love to see more.---Jack

Re: A new saw

#7

Question

Patrick Gibbons

I know the cut outs are decorative but could they interfere with the cut? I know this is a new saw but have you used another such saw enough to get some experience? Just curious.

Re: A new saw

#8

Re: Question

ron bontz

The wood is figured maple. I was experimenting with dye/stain. The piercing is high enough and forward enough on the plate to not interfere with the cut. At least not in my life time.:) That's a lot of sharpening.

Re: A new saw

#9

Robert Tutsky

Very, very nice!


Re: A new saw

#10

Re: A new saw

CStanford

Work of art. You should be proud. I like the setup of the blade.