New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

A little plumbing progress....

Posts

A little plumbing progress....

#1

A little plumbing progress....

roger lance

with a friend's help, the laundry tub is installed next to the sharpening station.....it will be great having a wet sink in the shop.....and its good to be getting some use out of an area of the basement that was sitting dormant.....


progress !!

Re: A little plumbing progress....

#2

Re: A little plumbing progress....

david weaver

Super setup there. There's 50 feet and a door between my wash tub and my sharpening bench. So much so that when I lap a stone, I squirt bottle the swarf onto the floor to be swept up after it dries.

Re: A little plumbing progress....

#3

Nice!

Tony-Memphis

I have a daydream of that very setup! No water in my shop....someday.

Tony

Re: A little plumbing progress....

#4

How sweet it is !!........

roger lance

its very nice and handy to have this sink in the sharpening area.....been using a diamond flattening stone on all my water stones....very convenient to run some water on the stones as you flatten.....easy to clean up after sharpening.....not all of my additions to the shop have proved to be keepers, but this sharpening set up was worth the effort.

Re: A little plumbing progress....

#5

Re: How sweet it is !!........

Ron in Sterling, CT

Roger,

I know what you mean. I have a basement shop with no sink or water faucet. At the dump this summer I found a new laundry sink (legs weren't even installed). I set it up in my shop, put a bucket underneath it, and placed a laundry detergent bottle (with a spigot on it) on the tub and filled it up with water. I now have running cold water in the shop, and only have to carry out the bucket ocasionaly. Works great for $0 investment.