We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
One of my grandaughters (10) loves to use a block plane. Another (7) likes to sweep the bench and enjoys sanding. Both sort of like hammers. Both get real interested and learn quickly when they have an idea and want to build it.
Our sons started doing stuff at four. I discovered that "under a lot of adult supervision" was an important part of that when our older son helpfully lubricated the door lock on my shop while I was elsewhere, using about 1/3 cup of oil from the squirt can, much of which ran down the door, of course. He was quite proud of his contribution.
But what they do from four to nine or so is, mostly, learning how to hold the tools and not scare themselves or you too much. You want safe-ish tools - small hammers, nails.
At nine, they can learn, with help, to use an eggbeater drill*, brace with bits up to their strength limit, rasps, block planes if you set the iron and help them understand not to take it apart, screwdrivers, small handsaws, and, of course, layout tools.
You'll struggle with learning how to bring the plans into reasonable scale - to a nine/ten-year-old, building a skyscraper doesn't look any harder than building a toy boat.
And remember, as I said to someone recently, that, when you're working with him in the shop, he's the project, not what you or he is trying to build.
Both my sons (ages 40 and 36) are competent with their hands; the younger one makes his living with them. The payoff for me of the times spent in the shop when they were little is working with them now.
There are books on this subject; see what your local library has.
*You might look around for a Stanley 610 (image below) or other fully-shielded drill; if your son catches his arm in the gears of a regular eggbeater, it will not add joy to his day. Fiskars makes some shielded eggbeaters, if you can't easily find a used one; not sure how they fit little hands, so you've have to try it out in the store.
Tony, Chuck a piece of wood in a vice and give the kid a spokeshave. Eggbeater drills are fun and fairly safe also. It all depends on how much of the kid's interest you can get. You can teach a 9 year old to do alot. At 9 I was building treehouses and go-carts with the neighborhood kids.---Jack
I owned a jig saw when I was 7 and cut out and painted all sorts of "household items".
My granddaughter has been working in the shop with me since she was 4. If you pre drill holes small kids can effectively nail. they can use a brad nailer to hold stuff in place, then drill pilot holes then nail. Shown is a blue bird house.
It is opportunities like this that make grandparents proud.......my granddaughter has been using my egg beater drills since she was 5. (I help hold and she cranks) She likes cranking the egg beater.
Hint, use finishing nails for drill bits in the smaller sizes. When they bend it is not loss.
Re: The picture of concentration, determination, a
Peter Evans
My eldest grandson started helping me make things at 2.5 - and was pretty good with a small eggbeater at 3. he is pretty good at using a hammer too. Now 3.5 he will get his own small bench this Xmas, vice and all. As well as a tiny but well made - and sharp - saw - that might drive my daughter top distraction of course.
As the grandsons live hundreds of kilometres away, do not see them that often. So make the most of the occasions.