New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

pin less leg vise *LINK*

Posts

Re: pin less leg vise *LINK*

#26

Re: Award winning idea

William Duffield

OK, I reposted, with a couple of additional construction tips and another photo, to both fora. It should be curious to compare the number of views, and the quantity and quality of responses, questions and further suggestions we receive from Hand Tools and from the unenlightened denizens of the Dark Side who never venture over here.

Re: pin less leg vise *LINK*

#27

"unenlightened denizens of the Dark Side"

Bill Houghton, Sebastopol, CA

The first reply to your reposting of these fixtures, over on the main board, cites a shaving mule - I guess Jerome Laux, whose reply it is, does not feel his device rises to the level of a horse.

Not so unenlightened.

Re: pin less leg vise *LINK*

#28

Re: "unenlightened denizens of the Dark Side"

William Duffield

That's a horse of a different feather. :)

Curious that JL doesn't post over here. He appears to be very skilled in Windsor Chairs. In any case, I realize we tend to participate in communities where we are most comfortable, so posting on both fora is still the best strategy for widely disseminating useful information.

I guess I understand the historical reasons that most of the woodworking websites have separate forums for hand tools and power tools (and turning, but I don't think we should go that far right now), but we need to ask ourselves whether the dichotomy is still necessary, or even desirable? Maybe the separation is more due to an aversion to puns than to forked tails? ;)

Re: pin less leg vise *LINK*

#29

Re: Downsides of the pin are overrated *LINK*

Lars Parrington

Thanks to everyone for the vise feedback. I've decided to go with the traditional pinned vise for now. I'll try that out for while and then retrofit a chain vise or st. peter's cross if i feel the need. In the mentime I'll keep an eye on Maquire's blog and hope he adds more details about his pinless vise.

Here's a picture of my bench and a link to a blog post post about it. Cheers.


img

http://lllars.com/the_workshop/roubo_workbench/index.php

Re: pin less leg vise *LINK*

#31

Re: pin less leg vise

Jim Ritter

Here is a link to a review of my pin less leg vise. I've just started selling it.